As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

MARCATO Atlas 150 Spaghetti and Lasagna Pasta Machine Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The MARCATO Atlas 150 spaghetti and lasagna machine (MCAT150SPA) is the classic hand-crank Atlas set up for two shapes: smooth lasagna sheets up to 150 mm (6 in) wide, and round spaghetti from the cutter that comes with it. A knob with 10 marked positions sets the thickness. It accepts 10 separately sold MARCATO cutters and the Pastadrive motor, so it can grow later. The chrome machine weighs 5.07 lb, measures about 8 x 7.1 x 6.2 in, and cost under $140 with low stock when we checked. Our view: the Atlas to choose if spaghetti matters more to you than fettuccine. Based on the listing and published specs, not on our own use.

What stands out

  • Spaghetti cutter in the MCAT150SPA box
  • 150 mm (6 in) lasagna sheets
  • 10 marked thickness positions
  • Takes the Pastadrive and 10 extra MARCATO cutters

Who it fits

Good fit for

Home cooks who mostly eat spaghetti and want lasagna sheets from the same hand-crank machine.

Who should skip it

Cooks who want fettuccine or tagliolini out of the box; that needs another Atlas version or an extra cutter.

Verdict: The spaghetti-first Atlas 150, with room to add cutters and a motor later.

MCAT150SPA in plain terms

Sheets up to 150 mm (6 in) wide

Wide enough for lasagna layers and for cutting ravioli by hand.

10-position thickness knob

Work down from thick to thin in clear, marked steps.

Spaghetti cutter included

Round strands from the start, without buying an add-on head.

10 add-on cutters and Pastadrive

Expand to more shapes or motor drive when you want them.

Build of the spaghetti Atlas

MARCATO makes and assembles this Atlas in Italy, in the chrome finish. Rollers flatten the dough, the spaghetti head sits on the accessory guides, and built-in resin scrapers clean the rollers as they turn.

The listing gives the size as 8.03 x 7.13 x 6.22 in and the weight as 5.07 lb, so it stores like any Atlas 150.

Spaghetti night with the Atlas

Roll the dough through the widest setting a few times, then step down the 10 positions; spaghetti usually works from a middle setting. Cut the sheet to length and crank it through the spaghetti head. For lasagna, stop at the sheet stage.

Let residue dry for at least 30 minutes, then brush it off; the machine is cleaned dry.

Before you buy the MCAT150SPA

Decide which cutter you want in the box: this version gives spaghetti, other Atlas 150 versions ship with a fettuccine and tagliolini cutter. Any of them can take more heads later. A table or counter edge for the clamp and a dry brush for cleaning are all you need.

Check before you buy

  • Spaghetti preferred over fettuccine
  • Table edge for cranking
  • Dry brush for cleanup
  • Pastadrive planned or not

The product at a glance

Marcato Atlas 150 Spaghetti and Lasagna Pasta Maker

Best for: Spaghetti-first home cooks

Operation Mode
Manual
Thickness Settings
10
Roller Width
150mm
Pasta Type
Spaghetti, Lasagna
Weight
5.07 pounds

View on Amazon: Marcato Atlas 150 Spaghetti and Lasagna Pasta Maker Affiliate link

The MARCATO Atlas 150 MCAT150SPA is a chrome, made-in-Italy hand-crank roller that rolls 150 mm sheets on 10 marked thickness settings and ships with a round spaghetti cutter. It takes the Pastadrive motor and 10 extra MARCATO cutters, cleans itself with resin scrapers, and weighs 5.07 lb.

Pros

  • MCAT150SPA ships with a spaghetti head
  • 150 mm MCAT150SPA sheets
  • Pastadrive fits the MCAT150SPA

Cons

  • No fettuccine cutter with the MCAT150SPA
  • MCAT150SPA is cleaned dry only

Good fit if

  • You want spaghetti and lasagna from one hand-crank Atlas

Skip if

  • Fettuccine is your main pasta; pick the fettuccine Atlas

Verdict: The Atlas 150 for spaghetti lovers.

Specifications side by side

Spec Marcato Atlas 150 Spaghetti and Lasagna Pasta Maker
Operation Mode Manual
Thickness Settings 10
Roller Width 150mm
Pasta Type Spaghetti, Lasagna
Weight 5.07 pounds
Size 8.03" x 7.13" x 6.22"
Color Chrome
Model MCAT150SPA

Frequently asked questions

What shapes does the MARCATO MCAT150SPA make out of the box?

Lasagna sheets and round spaghetti.

How wide are the Atlas 150 sheets?

Up to 150 mm, about 6 in.

How many thickness steps does the MCAT150SPA knob offer?

10, marked on the adjustment knob.

Can I add a motor to the spaghetti Atlas?

Yes, it works with the separately sold MARCATO Pastadrive motor.

How many extra MARCATO cutters fit it?

The listing names 10 separately available accessories.

See also