6 Best Pasta Makers with Spaghetti Cutter, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Of the 6 pasta makers with a spaghetti cutter here, our top pick is the MARCATO Atlas 150 MCAT150SPA: it is made in Italy, has 10 marked thickness stops and is sold specifically as a spaghetti-and-lasagna machine. The YASHE QF-150 is the cheapest with a stated 2 mm cut, the ISILER 177-1 has a cutter that comes apart for cleaning, the Sur La Table Va Bene adds colour, the Fante's 12017 rolls wider 180 mm sheets, and the GEFT does the cranking with a motor. Every pick has its spaghetti cutter in the box. Stand mixer pasta attachments with a spaghetti cutter are left out because they need a mixer to run; they have their own accessory list. Picks come from listing specs; we did not use these machines.
Our top pick: Marcato Atlas 150 Spaghetti and Lasagna Pasta Maker.
Quick picks
The best fit for you
- An Italian spaghetti machine you can add heads to Marcato Atlas 150 Spaghetti and Lasagna Pasta Maker Atlas 150 MCAT150SPA, 10 stops.
- 2 mm spaghetti for the least money YASHE Stainless Steel Manual Pasta Maker YASHE QF-150.
- A spaghetti cutter that is easy to clean ISILER Manual Pasta Maker with 9 Thickness Settings ISILER 177-1 cutter comes apart.
- A coloured roller Sur La Table Va Bene Manual Pasta Maker Sur La Table 143823.01, green finish.
- Wider lasagna sheets too Fante's Wide Pasta Machine With Double Pasta Cutter For Spaghetti And Fettuccine, For Rolling Extra-Wide Pasta Sheets And Creating Consistent Homemade Noodles Fante's 12017 at 180 mm.
- No hand cranking GEFT Electric Pasta Maker, White GEFT motor base.
Our 6 picks
Marcato Atlas 150 Spaghetti and Lasagna Pasta Maker
Best for: Cooks who will add more Atlas heads
- Operation Mode
- Manual
- Thickness Settings
- 10
- Roller Width
- 150mm
- Pasta Type
- Spaghetti, Lasagna
- Weight
- 5.07 pounds
View on Amazon: Marcato Atlas 150 Spaghetti and Lasagna Pasta Maker Affiliate link
The MARCATO Atlas 150 MCAT150SPA is the Atlas sold as a spaghetti-and-lasagna machine: its cutter makes spaghetti, the rollers make 150 mm sheets, and the knob has 10 marked thickness positions. It is made and assembled in Italy, has resin scrapers that keep the rollers clean, and takes 10 separately sold Marcato heads plus the Pastadrive motor. 5.07 lb; stock was low when checked.
Pros
- MCAT150SPA spaghetti cutter built for the Atlas
- Ten marked MCAT150SPA thickness stops
- Accepts the Pastadrive motor later
Cons
- Priciest spaghetti roller in this list
- MCAT150SPA has no fettuccine cut in the box
Good fit if
- You want an Italian-built roller that can grow with extra Marcato heads
Skip if
- You want spaghetti and fettuccine from one box for under $50
Verdict: The MCAT150SPA is the spaghetti machine to buy once and keep.
YASHE Stainless Steel Manual Pasta Maker
Best for: Pasta beginners on a budget
- Operation Mode
- Manual crank
- Cut Widths
- 2 mm, 6.5 mm
- Housing Material
- Stainless steel, aluminum alloy
- Included Attachments
- Pasta Roller
- Pasta Type
- Spaghetti, Fettuccine, Lasagna
- Color
- Silver
View on Amazon: YASHE Stainless Steel Manual Pasta Maker Affiliate link
The YASHE QF-150 was the lowest-priced spaghetti roller we found. Its dual cutter is sized 2 mm for spaghetti and 6.5 mm for fettuccine, and the rollers go from 0.3 to 3 mm. It is stainless steel and aluminum alloy, clamps to the counter and ships with a cleaning brush and cloth. YASHE does not give the number of settings. 6.39 lb.
Pros
- 2 mm QF-150 spaghetti width stated
- QF-150 rolls as thin as 0.3 mm
- YASHE adds a brush and cloth
Cons
- QF-150 setting count not given
- Clamp only, no suction base
Good fit if
- You want a stated 2 mm spaghetti cut for the least money
Skip if
- You need a numbered thickness dial
Verdict: The QF-150 is the cheapest way to cut real 2 mm spaghetti.
ISILER Manual Pasta Maker with 9 Thickness Settings
Best for: Cooks who clean as they go
- Operation Mode
- Manual crank
- Thickness Settings
- 9
- Cut Widths
- 2 mm, 6.6 mm
- Housing Material
- Stainless steel
- Application
- Dough
- Dimensions
- 7.9 × 6.1 × 7.7 inches
View on Amazon: ISILER Manual Pasta Maker with 9 Thickness Settings Affiliate link
The ISILER 177-1 lists its cutter widths as 2 mm and 6.6 mm and gives 9 thickness settings from 0.3 to 2.6 mm. Its redesigned cutter comes apart so you can reach the cutting rollers for cleaning, a common gripe with cheap rollers. The box holds the roller, cutter, crank, clamp and manual. 4 lb.
Pros
- ISILER cutter comes apart for cleaning
- Nine 177-1 settings from 0.3 mm
- Light 4 lb 177-1 body
Cons
- 177-1 thickest sheet is only 2.6 mm
- No brand-name support network
Good fit if
- You hate picking dried dough out of spaghetti blades
Skip if
- You want thick 3 mm sheets for rustic pasta
Verdict: The 177-1 is the budget spaghetti roller that is easiest to clean.
Sur La Table Va Bene Manual Pasta Maker
Best for: Kitchens that want colour on the counter
- Operation Mode
- Manual crank
- Thickness Settings
- 9
- Housing Material
- Stainless steel
- Pasta Type
- Spaghetti, Fettuccine, Lasagna, Dumplings
- Weight
- 4.66 pounds
View on Amazon: Sur La Table Va Bene Manual Pasta Maker Affiliate link
The Sur La Table Va Bene 143823.01 comes in a Juniper Green finish with a detachable shaper that cuts spaghetti strips and fettuccine ribbons. The dial runs from 0 to 9, the handle moves between the roller and the shaper, and a clamp holds it to the counter. Sur La Table says hand wash only and gives no cut widths. 4.66 lb; low stock.
Pros
- Green 143823.01 body from Sur La Table
- Va Bene dial runs 0 to 9
- One shaper cuts both 143823.01 noodles
Cons
- Va Bene cut widths not listed
- Hand wash only per Sur La Table
Good fit if
- You want a coloured spaghetti machine from a known kitchen retailer
Skip if
- You need exact spaghetti and fettuccine widths
Verdict: The Va Bene is the green, store-brand spaghetti roller.
Fante's Wide Pasta Machine With Double Pasta Cutter For Spaghetti And Fettuccine, For Rolling Extra-Wide Pasta Sheets And Creating Consistent Homemade Noodles
Best for: Lasagna and spaghetti households
- Pasta Type
- Spaghetti, Fettuccine
- Dimensions
- 9.06 × 7.9 × 6.3 inches
- Weight
- 5.1 pounds
The Fante's 12017 Cousin Angelo's Wide machine rolls 180 mm sheets, about an inch wider than the usual 150 mm, and its double cutter makes spaghetti and fettuccine. It has 9 thicknesses from 0.5 to 3 mm and an extra-wide clamp for surfaces 1 to 2.375 in thick. Fante's includes family recipes. 5.1 lb; stock was low.
Pros
- 180 mm sheets on the Fante's 12017
- Double 12017 cutter for spaghetti and fettuccine
- 12017 clamp fits 1-2.375 in tops
Cons
- 12017 cutter widths not given
- Wider body needs more counter room
Good fit if
- You want wide sheets for lasagna as well as spaghetti
Skip if
- You only make spaghetti and want a smaller machine
Verdict: The 12017 is the wide-sheet spaghetti roller.
GEFT Electric Pasta Maker, White
Best for: Families making big spaghetti batches
- Operation Mode
- Electric
- Thickness Settings
- 5
- Cut Widths
- 2 mm, 6 mm
- Included Attachments
- Pasta Roller, Fettuccine Cutter
- Application
- Dough
- Pasta Type
- Spaghetti, Fettuccine
View on Amazon: GEFT Electric Pasta Maker, White Affiliate link
The white GEFT-MTJ is a motor-driven roller with a 2 mm spaghetti cutter and a 6 mm fettuccine cutter included. Its knob has 5 settings from 0.6 to 2.5 mm, the attachments come off for brushing, and GEFT adds a dough bag. GEFT says never wash it with water or in a dishwasher and does not give a wattage. 6.6 lb.
Pros
- GEFT motor drives the spaghetti cutter
- GEFT-MTJ ships a 2 mm and a 6 mm blade
- GEFT includes a dough bag
Cons
- Only 5 GEFT thickness settings
- GEFT wattage not listed
Good fit if
- You want the motor to turn the rollers while you feed dough
Skip if
- You want more than five GEFT-MTJ thickness steps
Verdict: The GEFT is the powered spaghetti pick for tired arms.
Specifications side by side
| Spec | Marcato Atlas 150 Spaghetti and Lasagna Pasta Maker | YASHE Stainless Steel Manual Pasta Maker | ISILER Manual Pasta Maker with 9 Thickness Settings | Sur La Table Va Bene Manual Pasta Maker | Fante's Wide Pasta Machine With Double Pasta Cutter For Spaghetti And Fettuccine, For Rolling Extra-Wide Pasta Sheets And Creating Consistent Homemade Noodles | GEFT Electric Pasta Maker, White |
|---|---|---|---|---|---|---|
| Operation Mode | Manual | Manual crank | Manual crank | Manual crank | not stated | Electric |
| Thickness Settings | 10 | not stated | 9 | 9 | not stated | 5 |
| Roller Width | 150mm | not stated | not stated | not stated | not stated | not stated |
| Cut Widths | not stated | 2 mm, 6.5 mm | 2 mm, 6.6 mm | not stated | not stated | 2 mm, 6 mm |
| Housing Material | not stated | Stainless steel, aluminum alloy | Stainless steel | Stainless steel | not stated | not stated |
| Included Attachments | not stated | Pasta Roller | not stated | not stated | not stated | Pasta Roller, Fettuccine Cutter |
| Application | not stated | not stated | Dough | not stated | not stated | Dough |
| Pasta Type | Spaghetti, Lasagna | Spaghetti, Fettuccine, Lasagna | not stated | Spaghetti, Fettuccine, Lasagna, Dumplings | Spaghetti, Fettuccine | Spaghetti, Fettuccine |
| Color | Chrome | Silver | Silver A | Juniper Green | Chrome | White |
| Weight | 5.07 pounds | 6.39 pounds | 4 pounds | 4.66 pounds | 5.1 pounds | 6.6 pounds |
| Dimensions | not stated | 9.76 × 8.98 × 6.69 inches | 7.9 × 6.1 × 7.7 inches | not stated | 9.06 × 7.9 × 6.3 inches | 11.6 × 5.9 × 12.7 inches |
| Size | 8.03" x 7.13" x 6.22" | M | not stated | Pasta Maker | Classic 180 Pasta | Standard |
| Model | MCAT150SPA | QF-150 | 177-1 | 143823.01 | 12017 | GEFT-MTJ-WHITE |
If you also need a tool for trimming recipe cards or kitchen labels, our guide to the best BREVELTION paper cutters compares those models by their specs.
Choosing a roller for spaghetti
-
Spaghetti width
A 2 mm cutter gives classic spaghetti; narrower cutters lean toward tagliolini or angel hair. Only some listings print the figure.
-
Sheet thickness
Spaghetti is cut from a fairly thin sheet, so a roller with many steps near 1 mm (Marcato's 10 stops, ISILER's 9) makes it easier to land on the right one.
-
Cleaning the cutter
Spaghetti blades trap dough. Let it dry and brush it out; the ISILER cutter opens up, and none of these should go in water.
-
Hand or motor
Cranking and feeding at once takes practice. The GEFT runs the rollers for you, and the Marcato can take a motor later.
Frequently asked questions
Which of these machines lists the thinnest spaghetti cut?
YASHE, ISILER and GEFT all list 2 mm; the other three do not give a width.
Does the MCAT150SPA also cut fettuccine?
Not in the box. That version ships with a spaghetti cutter; Marcato sells other Atlas heads separately.
Why are KitchenAid spaghetti attachments missing?
They run off a stand mixer's power hub, so we cover them in our stand mixer accessory list with a spaghetti cutter.
Can I wash a spaghetti cutter?
These listings say to brush it dry; GEFT and Sur La Table warn against water or the dishwasher.





