ISILER 177-1 3-in-1 Manual Pasta Maker Review: 9 Settings, 2 Cutters
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ISILER 177-1 is a hand-crank pasta maker with nine thickness settings, from 2.6 mm down to a very thin 0.3 mm, and a cutter for 2 mm spaghetti-style noodles and 6.6 mm fettuccine. The box has the machine, cutter attachment, crank, table clamp and a manual. ISILER says the cutter was redesigned so it can be taken apart to reach the cutting rollers, which helps cleaning. The listing calls the build stainless steel and gives 7.9 x 6.1 x 7.7 in and 4 lb. It was in stock under $30 when we checked. Verdict: one of the best value rollers on the market, with a clamp included and a true fettuccine cut; the thickest setting of 2.6 mm is a little thinner than some machines' 3 mm. Our notes on the 177-1 come from its listing and published specs; we have not rolled dough on it.
What stands out
- ISILER 177-1: 9 settings, 0.3 to 2.6 mm
- 177-1 cuts 2 mm and 6.6 mm noodles
- Table clamp and crank in the box
- 177-1 cutter can be taken apart to clean
Who it fits
Good fit for
Budget buyers who want a complete kit with a clamp and both spaghetti and fettuccine cuts.
Who should skip it
Cooks who want a motor option or very thick sheets above 2.6 mm.
Verdict: A complete budget roller with a clamp.
ISILER 177-1 specs from the listing
9 settings, 0.3-2.6 mm
Very thin sheets for filled pasta.
ISILER cutters: 2 and 6.6 mm
Spaghetti-style and fettuccine.
Clamp, crank, cutter, manual
Ready to use out of the box.
177-1 size: 7.9 x 6.1 x 7.7 in, 4 lb
Light for a steel roller.
How the ISILER 177-1 is built
The 177-1 has a steel body, smooth rollers with a nine-step knob and a separate cutter attachment. The cutter can be dismantled to reach its rollers, which is not common on budget machines. The listing color is "Silver A"; the size and weight are for this model.
Rolling pasta on the ISILER 177-1
Clamp the 177-1 to the counter, pass the dough through the widest setting a few times, then step down. Stop around the middle for noodles, or go to the thin end for ravioli and lasagna sheets. Fit the cutter and feed the sheet through the 2 mm or 6.6 mm side.
ISILER does not give a washing method beyond taking the cutter apart; a dry brush is the safe choice for rollers.
Before you buy the ISILER 177-1
Check your counter edge for the clamp. If you prefer thick, rustic sheets, note the 2.6 mm maximum. Compared with the Nuvantee XK1005, the 177-1 adds two thickness steps and a wider fettuccine cut for about the same price.
Check before you buy
- Counter edge suits the clamp
- 2.6 mm maximum is enough
- Spaghetti and fettuccine both wanted
- Dry brush ready for the rollers
The product at a glance
ISILER Manual Pasta Maker with 9 Thickness Settings
Best for: First roller with a clamp in the box
- Operation Mode
- Manual crank
- Thickness Settings
- 9
- Cut Widths
- 2 mm, 6.6 mm
- Housing Material
- Stainless steel
- Application
- Dough
- Dimensions
- 7.9 × 6.1 × 7.7 inches
View on Amazon: ISILER Manual Pasta Maker with 9 Thickness Settings Affiliate link
The ISILER 177-1 is a hand-crank pasta maker with nine settings from 0.3 to 2.6 mm, 2 mm and 6.6 mm cutters, and a clamp and crank in the box. It weighs 4 lb and its cutter comes apart for cleaning.
Pros
- ISILER 177-1 includes a table clamp
- ISILER 177-1 cuts true fettuccine
- ISILER 177-1 cutter is easy to clean
Cons
- ISILER 177-1 tops out at 2.6 mm
- ISILER 177-1 is hand-crank only
Good fit if
- You want a full kit for under $30
Skip if
- You want a motor to turn the 177-1 rollers
Verdict: A complete, low-cost roller kit.
Specifications side by side
| Spec | ISILER Manual Pasta Maker with 9 Thickness Settings |
|---|---|
| Operation Mode | Manual crank |
| Thickness Settings | 9 |
| Cut Widths | 2 mm, 6.6 mm |
| Housing Material | Stainless steel |
| Application | Dough |
| Dimensions | 7.9 × 6.1 × 7.7 inches |
| Weight | 4 pounds |
| Color | Silver A |
| Model | 177-1 |
Frequently asked questions
How many thickness settings does the ISILER 177-1 have?
Nine, from 0.3 to 2.6 mm.
What widths does the ISILER 177-1 cut?
2 mm and 6.6 mm.
Does the ISILER 177-1 include a clamp?
Yes, with a crank, cutter attachment and manual.
Can the ISILER 177-1 cutter be taken apart?
Yes, ISILER says it can be dismantled for cleaning.
How heavy is the ISILER 177-1?
4 lb.
Featured in
See also
- kyuewrt 9 blade pasta cutter review
- ourokhome collapsible pasta drying rack yellow review
- nevku ns 1881 kitchenaid pasta attachment set review
- best hand mixers under 30
- best stand mixers under 50
- 8 Best Stand Mixers Under $100, Compared
- Best Stand Mixers Under $150 in 2026: 10 Picks Ranked by Specs
- Best Stand Mixers Under $200: 8 Spec-Based Picks
- saluna 25 in 1 bread maker review
- surewin 3 in 1 vegetable review
