FOHERE MMD150-II Electric Pasta Maker Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The FOHERE MMD150-II is an electric pasta roller: a 60 W motor built into the base turns the rollers, and two separate cutter heads give 1.5 mm and 6.6 mm noodles. The thickness dial has seven steps from 0.5 mm to 3 mm, thin enough for wonton and dumpling wrappers. The body and blades are 304 stainless steel, FOHERE rates it for up to an hour of continuous use with a cooling system beside the motor, and anti-slip pads sit underneath. It weighs 12.9 lb. Verdict: the MMD150-II suits households that roll sheets and wrappers often and want the crank gone; it does not mix or knead, so the dough is still made by hand. Two sizes appear in the listing (16 x 5.9 x 8.3 in in the specs, 8.3 x 5.6 x 8.4 in in the text), so measure your shelf for the larger one. We read FOHERE's listing and specs; we did not run it.
What stands out
- 60 W motor built into the base
- MMD150-II dial: 0.5-3 mm in seven steps
- Two cutter heads: 1.5 mm and 6.6 mm
- Rated for an hour of continuous use
Who it fits
Good fit for
Families who roll noodles, lasagna sheets and dumpling wrappers often and want both hands free.
Who should skip it
Cooks after a machine that kneads and extrudes, or who work with very stiff, low-hydration dough.
Verdict: A motorised two-head sheeter for frequent home use.
FOHERE MMD150-II specs from the listing
MMD150-II motor: 60 W, built in
Up to 1 hour continuous, per FOHERE.
MMD150-II thickness: 7 steps, 0.5-3 mm
Wrapper-thin to lasagna sheets.
MMD150-II cutter heads: 1.5 and 6.6 mm
Thin noodles and fettuccine.
MMD150-II build: 304 stainless, 12.9 lb
Two different sizes listed.
How the FOHERE MMD150-II is built
The MMD150-II hides its 60 W motor in the base, with a heat-dissipation system next to it and shock-absorbing anti-slip pads under it. The roller section and the two cutter heads mount on top; the heads swap rather than sitting side by side. FOHERE lists 304 stainless steel for the body and blades. The machine is sold by Maxceysen as the MD150-II with 2 mm and 6.5 mm heads instead of 1.5 mm and 6.6 mm.
Using the FOHERE MMD150-II
Switch on the MMD150-II, feed a flattened piece of dough at the thickest setting, fold and repeat, then step down through the dial. Fit the 1.5 mm or 6.6 mm head and run the sheet through to cut. Gluten-free and spelt flour are named as options, and vegetable juice can colour the dough.
FOHERE says to wipe the MMD150-II with a dry cloth and clean the blades with the supplied brush; never put it in water or a dishwasher.
Before you buy the FOHERE MMD150-II
Choose the FOHERE MMD150-II if you want 1.5 mm noodles and a stated hour of continuous running. Choose the Maxceysen MD150-II if 2 mm noodles suit you better; the base and motor are the same. Choose the manual FOHERE QF-150 if you make pasta only now and then and a light hand-crank is enough.
Check before you buy
- Dough mixed by hand or in a mixer first
- Shelf space for a 16 in machine
- Dry-cloth and brush cleaning only
- Outlet near the MMD150-II spot
The product at a glance
FOHERE Electric Pasta Maker
Best for: Dumpling and noodle households
- Operation Mode
- Electric motor
- Thickness Settings
- 7
- Cut Widths
- 1.5 mm, 6.6 mm
- Housing Material
- 304 stainless steel
- Motor Wattage
- 60 W
- Pasta Type
- Spaghetti, Fettuccine, Lasagna, Dumplings
View on Amazon: FOHERE Electric Pasta Maker Affiliate link
The FOHERE MMD150-II is a 304 stainless electric roller with a 60 W built-in motor, seven settings from 0.5 to 3 mm and 1.5 mm and 6.6 mm cutter heads. It weighs 12.9 lb.
Pros
- MMD150-II motor frees both hands
- MMD150-II rolls wrapper-thin 0.5 mm
- MMD150-II runs up to an hour
Cons
- MMD150-II lists two different sizes
- MMD150-II does not knead or mix
Good fit if
- You roll sheets and wrappers often
Skip if
- You want mixing and extruding too
Verdict: A motorised sheeter for frequent use.
Specifications side by side
| Spec | FOHERE Electric Pasta Maker |
|---|---|
| Operation Mode | Electric motor |
| Thickness Settings | 7 |
| Cut Widths | 1.5 mm, 6.6 mm |
| Housing Material | 304 stainless steel |
| Motor Wattage | 60 W |
| Pasta Type | Spaghetti, Fettuccine, Lasagna, Dumplings |
| Dimensions | 16 × 5.9 × 8.3 inches |
| Weight | 12.9 pounds |
| Size | Large |
| Color | Sliver |
| Model | MMD150-II |
Frequently asked questions
How powerful is the FOHERE MMD150-II?
The MMD150-II has a 60 W built-in motor.
What noodle widths does the MMD150-II cut?
Its two heads cut 1.5 mm and 6.6 mm.
How thin does the MMD150-II roll?
Down to 0.5 mm, across seven steps to 3 mm.
Can the MMD150-II go in the dishwasher?
No. FOHERE says never immerse the MMD150-II; wipe it and brush the blades.
Does the MMD150-II knead dough?
No. The MMD150-II rolls and cuts dough you have already made.
