6 Best Stand Mixer Accessories with Pasta Roller, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Every attachment here rolls pasta sheets from a stand mixer's power hub. Our top pick of the 6 is KitchenAid's KSM3PPA, a single attachment that rolls 5-inch sheets on 8 settings and cuts spaghetti or fettuccine without swapping parts. The ZACME three-piece set is the one to buy for a Cuisinart SM-50, the Mavouse is an all-metal 3-in-1 for less, the NEWSETS NP-K027-001 is the lightest 3-in-1, the GVODE EUHLG1708 is the cheapest roller on its own, and the KitchenAid KPSA is the brand's stand-alone 6-inch roller. Picks come from listing data; we did not roll pasta with them.
Our top pick: KitchenAid 3-in-1 Pasta Attachment.
Quick picks
The best fit for you
- A genuine KitchenAid roller and cutters in one KitchenAid 3-in-1 Pasta Attachment KSM3PPA by KitchenAid.
- A roller that lists Cuisinart SM-50 fit ZACME 3-Piece Stainless Steel Pasta Set ZACME names SM-50, SM-50BC and SM-50R.
- All-metal 3-in-1 below KitchenAid's price Mavouse All Metal 3-in-1 Pasta Attachment Mavouse MV-KAPASTA-0003.
- The lightest one-piece roller and cutter NEWSETS 3-in-1 Pasta Maker Attachment NEWSETS NP-K027-001 at 3.31 lb.
- Just a roller for the least money GVODE Pasta Roller Attachment for KitchenAid Stand Mixer, 8 Settings | 304 Stainless Steel, 8 Adjustable Thickness Settings (0.4-2mm), Fits all KitchenAid Stand Mixer Models GVODE EUHLG1708, 0.4-2 mm.
- A KitchenAid roller to pair with KitchenAid cutters KitchenAid KPSA Stand-Mixer Pasta-Roller Attachment KPSA makes 6-inch sheets.
Our 6 picks
KitchenAid 3-in-1 Pasta Attachment
Best for: KitchenAid owners who want the brand's part
- Compatibility
- KitchenAid stand mixers power hub
- Operation Mode
- Powered by KitchenAid stand mixer
- Material
- Stainless steel
- Thickness Settings
- 8 settings
- Sheet Width
- 5 inch (12.7 cm)
- Cut Types
- Spaghetti, fettuccine, lasagna sheets
View on Amazon: KitchenAid 3-in-1 Pasta Attachment Affiliate link
KitchenAid's own KSM3PPA puts the pasta roller and both cutters in one attachment, so you roll a sheet, then feed it through the spaghetti or fettuccine side without swapping parts on the power hub. The roller makes 5-inch (12.7 cm) sheets with 8 thickness settings, the rollers and cutters are stainless steel, and a removable top cover plus brush handle cleaning. It fits all KitchenAid stand mixers' power hub and weighs 4.07 lb. It is the most expensive set here.
Pros
- Genuine KitchenAid KSM3PPA fit
- Roller and two cutters in one KSM3PPA body
- KSM3PPA lift-off cover for cleaning
Cons
- Priciest roller set in this list
- KSM3PPA sheets are 5 in, not 6 in
Good fit if
- You want KitchenAid's own all-in-one roller and cutter
Skip if
- You want a roller for the least money
Verdict: The KSM3PPA is the safest fit for a KitchenAid owner who wants one attachment.
ZACME 3-Piece Stainless Steel Pasta Set
Best for: Cuisinart mixer owners who want sheets and noodles
- Included Attachments
- ✓ Pasta Roller, Fettuccine Cutter, Spaghetti Cutter
- Compatibility
- KitchenAid, Cuisinart SM-50 series
- Material
- stainless steel
- Thickness Settings
- 8 settings
- Cut Types
- spaghetti, fettuccine
- Included Components
- roller, fettuccine & spaghetti cutters
View on Amazon: ZACME 3-Piece Stainless Steel Pasta Set Affiliate link
ZACME's set is three separate stainless pieces: a pasta roller with an 8-position knob, a fettuccine cutter and a spaghetti cutter. Besides all KitchenAid stand mixers, ZACME lists the Cuisinart SM-50, SM-50BC and SM-50R as compatible, which makes it one of the few roller sets here for a Cuisinart owner. A cleaning brush is included, and ZACME offers 1-year service; the set weighs 5.82 lb.
Pros
- ZACME lists Cuisinart SM-50 fit
- Three separate ZACME pieces
- 8-position ZACME roller knob
Cons
- Swap pieces between rolling and cutting
- Heaviest set in this group
Good fit if
- You own a Cuisinart SM-50 and want a roller
Skip if
- You want one attachment that rolls and cuts
Verdict: The ZACME set is the cross-brand roller choice.
Mavouse All Metal 3-in-1 Pasta Attachment
Best for: Cooks who make pasta in one pass
- Included Attachments
- ✓ Pasta Roller, Fettuccine Cutter, Spaghetti Cutter
- Compatibility
- Most KitchenAid Stand Mixers
- Operation Mode
- Mixer-driven
- Material
- Stainless steel
- Cut Types
- Spaghetti, Fettuccine, Angel hair
- Color
- Silver
View on Amazon: Mavouse All Metal 3-in-1 Pasta Attachment Affiliate link
Mavouse's MV-KAPASTA-0003 is a one-piece 3-in-1: roller, fettuccine cutter and spaghetti (angel hair) cutter in a single all-metal body with stainless gears, so you do not change attachments mid-batch. An 8-setting knob sets sheet thickness. It fits most KitchenAid stand mixers, weighs 4.54 lb, and cleans with the included brush after you open the cover; it is not dishwasher safe. Atbod sells the same design as KAPASTA-0005, usually for a few dollars more.
Pros
- All-metal Mavouse body, no plastic shell
- No swapping on the MV-KAPASTA-0003
- Mavouse costs less than the Atbod twin
Cons
- 'Most' KitchenAid mixers, not all
- Hand-clean the Mavouse only
Good fit if
- You want an all-metal one-piece roller and cutter for less than KitchenAid's
Skip if
- You want a genuine KitchenAid part
Verdict: The Mavouse is the value all-metal 3-in-1.
NEWSETS 3-in-1 Pasta Maker Attachment
Best for: Cooks who store attachments in a drawer
- Included Attachments
- ✓ Pasta Roller, Fettuccine Cutter
- Compatibility
- KitchenAid stand mixers
- Operation Mode
- Mixer-driven
- Material
- Stainless steel, plastic
- Cut Types
- Spaghetti, fettuccine
- Included Components
- 3-in-1 roller & cutter, brush, manual
View on Amazon: NEWSETS 3-in-1 Pasta Maker Attachment Affiliate link
The NEWSETS NP-K027-001 is another one-piece 3-in-1, but with stainless blades and gears inside a plastic shell, which keeps it to 3.31 lb, the lightest 3-in-1 here. You roll the sheet repeatedly to the thickness you want, then cut spaghetti or fettuccine without changing parts. A detachable bottom cover and brush help cleaning. The manual includes water-to-flour ratios, and NEWSETS gives a 365-day replacement guarantee. It is designed for KitchenAid but not made by KitchenAid.
Pros
- 3.31 lb NP-K027-001, lightest 3-in-1
- Water-to-flour ratios in the NEWSETS manual
- NEWSETS 365-day replacement
Cons
- Plastic shell on the NP-K027-001
- No thickness step count given
Good fit if
- You want a light one-piece set and do not mind a plastic shell
Skip if
- You want the NP-K027-001 without plastic
Verdict: The NP-K027-001 is the light, mid-priced 3-in-1.
GVODE Pasta Roller Attachment for KitchenAid Stand Mixer, 8 Settings | 304 Stainless Steel, 8 Adjustable Thickness Settings (0.4-2mm), Fits all KitchenAid Stand Mixer Models
Best for: Sheet-only pasta cooks on a budget
- Included Attachments
- ✓ Pasta Roller
- Color
- Silver
- Dimensions
- 9.1 × 2.1 × 3.7 inches
- Weight
- 1.87 pounds
If you only need to roll sheets, for lasagna, ravioli or hand-cut noodles, GVODE's EUHLG1708 roller is the cheapest attachment in this list. It is SUS 304 stainless with a polished finish and an 8-position knob from 0.4 to 2 mm, fits all KitchenAid stand mixers, and weighs just 1.87 lb. Clean it with the included brush and a little water; do not soak it or put it in the dishwasher. The listing notes GVODE designed it independently of KitchenAid.
Pros
- 0.4-2 mm range stated for the EUHLG1708
- Lowest price in this roller list
- 1.87 lb GVODE roller
Cons
- Roller only, no cutters with the EUHLG1708
- GVODE roller must be hand-cleaned
Good fit if
- You want just a pasta roller for KitchenAid at a low price
Skip if
- You want cutters in the box
Verdict: The EUHLG1708 is the budget roller.
KitchenAid KPSA Stand-Mixer Pasta-Roller Attachment
Best for: Owners adding to a KitchenAid pasta set
- Included Attachments
- ✓ Pasta Roller
- Dimensions
- 2.12 × 9.62 × 3.5 inches
- Weight
- 3 pounds
View on Amazon: KitchenAid KPSA Stand-Mixer Pasta-Roller Attachment Affiliate link
KitchenAid's KPSA is the brand's stand-alone pasta roller: a metal attachment that makes 6-inch sheets, sized to feed KitchenAid's cutters and ravioli maker (sold separately). It adjusts from thick to thin, measures about 3.5 x 9.6 x 2 in, weighs 3 lb, and carries a 1-year limited warranty. Hand washing is recommended. The listing does not give the number of thickness settings.
Pros
- 6-inch KPSA sheets
- KPSA comes with a 1-year KitchenAid warranty
- Matches KitchenAid cutters and ravioli maker
Cons
- KPSA costs far more than the GVODE roller
- No setting count in the KPSA listing
Good fit if
- You want a genuine KitchenAid roller to pair with KitchenAid cutters
Skip if
- You want cutters included
Verdict: The KPSA is the brand roller for building a KitchenAid pasta kit.
Specifications side by side
| Spec | KitchenAid 3-in-1 Pasta Attachment | ZACME 3-Piece Stainless Steel Pasta Set | Mavouse All Metal 3-in-1 Pasta Attachment | NEWSETS 3-in-1 Pasta Maker Attachment | GVODE Pasta Roller Attachment for KitchenAid Stand Mixer, 8 Settings | 304 Stainless Steel, 8 Adjustable Thickness Settings (0.4-2mm), Fits all KitchenAid Stand Mixer Models | KitchenAid KPSA Stand-Mixer Pasta-Roller Attachment |
|---|---|---|---|---|---|---|
| Compatibility | KitchenAid stand mixers power hub | KitchenAid, Cuisinart SM-50 series | Most KitchenAid Stand Mixers | KitchenAid stand mixers | not stated | not stated |
| Operation Mode | Powered by KitchenAid stand mixer | not stated | Mixer-driven | Mixer-driven | not stated | not stated |
| Material | Stainless steel | stainless steel | Stainless steel | Stainless steel, plastic | not stated | not stated |
| Thickness Settings | 8 settings | 8 settings | not stated | not stated | not stated | not stated |
| Sheet Width | 5 inch (12.7 cm) | not stated | not stated | not stated | not stated | not stated |
| Cut Types | Spaghetti, fettuccine, lasagna sheets | spaghetti, fettuccine | Spaghetti, Fettuccine, Angel hair | Spaghetti, fettuccine | not stated | not stated |
| Included Components | 3-in-1 attachment, cleaning brush | roller, fettuccine & spaghetti cutters | not stated | 3-in-1 roller & cutter, brush, manual | not stated | not stated |
| Included Attachments | not stated | Pasta Roller, Fettuccine Cutter, Spaghetti Cutter | Pasta Roller, Fettuccine Cutter, Spaghetti Cutter | Pasta Roller, Fettuccine Cutter | Pasta Roller | Pasta Roller |
| Application | not stated | not stated | not stated | Dough | not stated | not stated |
| Pasta Type | not stated | Spaghetti, Fettuccine | Spaghetti, Fettuccine | Spaghetti, Fettuccine | not stated | not stated |
| Color | White | Silver | Silver | Black-White | Silver | Pasta Roller |
| Dimensions | 10.4 × 6.5 × 2.4 inches | not stated | not stated | 5 × 2 × 10 inches | 9.1 × 2.1 × 3.7 inches | 2.12 × 9.62 × 3.5 inches |
| Weight | 4.07 pounds | 5.82 pounds | 4.54 pounds | 3.31 pounds | 1.87 pounds | 3 pounds |
| Size | Large | 3-Piece Set (Roller & Cutters) | Pasta Maker Attachment 3 in 1 Set | 5.5"L x 2"W x 10"H | Silver- Pasta Roller Attachment | regular |
| Model | KSM3PPA | 001 | MV-KAPASTA-0003 | Pasta Maker Attachments - NP-K027-001 | EUHLG1708 | KPSA |
Choosing a pasta roller attachment
-
Mixer brand
Every pick fits KitchenAid's power hub; only the ZACME lists Cuisinart SM-50 models too.
-
Roller only or full set
Choose the GVODE or KPSA if you want sheets for lasagna and ravioli; choose a 3-in-1 if you mostly make spaghetti and fettuccine.
-
Sheet width
KitchenAid lists 6-inch sheets for the KPSA and 5-inch for the KSM3PPA; the other makers do not state a width.
-
Cleaning
None of these is listed as dishwasher safe. Let dough dry, then brush it out.
Frequently asked questions
Do these pasta rollers fit every KitchenAid stand mixer?
KitchenAid, ZACME, NEWSETS and GVODE say all KitchenAid stand mixers; Mavouse says most. Check your mixer has a front power hub.
Which roller attachment works with a Cuisinart stand mixer?
The ZACME set lists the Cuisinart SM-50, SM-50BC and SM-50R.
Are the Mavouse and Atbod 3-in-1 sets different?
Their listings share the same text, 8-setting knob and near-identical weights, so we count them as one design and list the cheaper Mavouse.
Can I wash a pasta roller attachment in the dishwasher?
No listing here allows it. Brush off dried dough and wipe with a dry or slightly damp cloth.
See also
- best stand mixer accessories for spaghetti
- best stand mixer accessories for fettuccine
- best stand mixer accessories for ravioli
- best hand mixers under 30
- best stand mixers under 50
- 8 Best Stand Mixers Under $100, Compared
- Best Stand Mixers Under $150 in 2026: 10 Picks Ranked by Specs
- Best Stand Mixers Under $200: 8 Spec-Based Picks
- best stand mixers for baking
- best audio mixers with stand





