KitchenAid 3-in-1 Pasta Attachment Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The KitchenAid KSM3PPA 3-in-1 Pasta Attachment is a single unit that clips onto the power hub of a KitchenAid stand mixer and both rolls and cuts fresh pasta. It flattens dough into 5 in sheets at 8 thickness settings, then cuts spaghetti or fettuccine; uncut sheets go to lasagna. It suits KitchenAid owners who want fresh noodles without storing three separate heads. This review is based on KitchenAid's listing; we did not test it.
What stands out
- Roller plus two cutters in one KSM3PPA body
- 5 in (12.7 cm) sheet width
- 8 KSM3PPA thickness steps
- Stainless rollers and cutters, per the title
- Removable cover and brush for cleanup
Who it fits
Good fit for
It fits a KitchenAid owner who makes pasta now and then, wants to go from sheet to noodle without changing attachments, and has little room in the drawer for a full set.
Who should skip it
Skip it if you do not own a KitchenAid mixer, or if you want more cuts: KitchenAid's separate roller-and-cutter sets add capellini or lasagnette, and ravioli needs its own tool.
Verdict: Convenient and compact for the three everyday pasta styles; a separate set gives more shapes.
KSM3PPA figures in plain terms
Cuts: spaghetti, fettuccine; sheets for lasagna
Two noodle widths plus the plain sheet. Anything else needs another tool.
8 KSM3PPA roller settings
Start thick and step the dough down pass by pass; KitchenAid does not give the gap in mm.
5 in (12.7 cm) sheet
A standard home width, so a batch takes a few passes.
10.4 x 6.5 x 2.4 in, 4.07 lb
About the size of a hardback book; it stores in a drawer.
How the KSM3PPA is built
The roller and both cutters sit in one housing that attaches to the front power hub, so the mixer motor drives everything. KitchenAid's title says the rollers and cutters are stainless steel; the housing material is not given.
The top cover comes off so you can reach the cutters with the included brush. This listing is the white version.
Rolling and cutting on the KSM3PPA
Fit the attachment to the hub, set the roller to its thickest setting and feed a floured piece of dough through at a low mixer speed. Step down a setting at a time until the sheet is as thin as you want.
Then feed the sheet through the spaghetti or fettuccine cutter on the same unit, or lay it out whole for lasagna. Let the parts dry, then brush out flour and scraps with the cover removed.
Before you order
It works only with KitchenAid stand mixers that have the front hub, which KitchenAid says covers all of its stand mixers. The listing does not mention dishwasher use, so plan on brushing it clean.
Check before you buy
- Confirm your mixer is a KitchenAid with a front hub
- Decide whether two noodle widths are enough
- Keep the brush for cutter cleanup
- Compare with a separate roller and cutter set if you want more shapes
The product at a glance
KitchenAid 3-in-1 Pasta Attachment
Best for: KitchenAid owners short on drawer space
- Compatibility
- KitchenAid stand mixers power hub
- Operation Mode
- Powered by KitchenAid stand mixer
- Material
- Stainless steel
- Thickness Settings
- 8 settings
- Sheet Width
- 5 inch (12.7 cm)
- Cut Types
- Spaghetti, fettuccine, lasagna sheets
View on Amazon: KitchenAid 3-in-1 Pasta Attachment Affiliate link
The KSM3PPA is KitchenAid's roll-and-cut pasta attachment in one body: it runs off the power hub of any KitchenAid stand mixer, rolls 5 in (12.7 cm) sheets at 8 thickness settings and cuts them into spaghetti or fettuccine, or leaves them whole for lasagna. The title says the rollers and cutters are stainless steel. A removable top cover and a cleaning brush handle cleanup. The listing gives about 10.4 x 6.5 x 2.4 in and 4.07 lb.
Pros
- KSM3PPA rolls and cuts without swapping heads
- 8 thickness steps on a 5 in sheet
- KSM3PPA top cover lifts off for brushing
Cons
- Only two noodle widths on the KSM3PPA
- Needs a KitchenAid hub; no motor of its own
Good fit if
- You own a KitchenAid stand mixer and want one KSM3PPA unit instead of three separate pasta heads
Skip if
- You want capellini, lasagnette or ravioli shapes from the KSM3PPA
Verdict: A tidy one-piece pasta tool for KitchenAid owners who mostly make spaghetti, fettuccine and lasagna.
Specifications side by side
| Spec | KitchenAid 3-in-1 Pasta Attachment |
|---|---|
| Compatibility | KitchenAid stand mixers power hub |
| Operation Mode | Powered by KitchenAid stand mixer |
| Material | Stainless steel |
| Thickness Settings | 8 settings |
| Sheet Width | 5 inch (12.7 cm) |
| Cut Types | Spaghetti, fettuccine, lasagna sheets |
| Included Components | 3-in-1 attachment, cleaning brush |
| Color | White |
| Dimensions | 10.4 × 6.5 × 2.4 inches |
| Weight | 4.07 pounds |
| Size | Large |
| Model | KSM3PPA |
If you are weighing which mixer will run this attachment, our kitchenaid kitchenaid 84211643 1 2 horsepower continuous review covers that model's published specifications in detail.
Frequently asked questions
Which pasta shapes does the KSM3PPA make?
Spaghetti and fettuccine, plus whole sheets for lasagna.
Does the KitchenAid 3-in-1 pasta attachment fit every KitchenAid mixer?
KitchenAid says it fits all KitchenAid stand mixer power hubs.
How wide are the KSM3PPA sheets?
5 inches (12.7 cm).
Are the KSM3PPA rollers metal?
The title lists stainless steel rollers and cutters.
What comes in the KSM3PPA box?
The 3-in-1 attachment and a cleaning brush.
