NEWTRY QM-1-003 Pasta Maker with Detachable Motor Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The NEWTRY QM-1-003 is a stainless pasta roller that runs two ways: fit the crank and turn it by hand, or attach the external motor and let it drive the rollers. Because the motor sits outside the body, NEWTRY says no oil reaches the rollers and the whole machine can be washed with water once the motor is off. It has seven thickness settings on a 5.7 in sheet and two cutters, 1.5 mm spaghetti and 6 mm fettuccine. NEWTRY gives the settings as 0.5 mm at level 1 down to 0.2 mm at level 7; that range is much thinner than most rollers state, so treat the numbers with care. The listing gives 13.38 x 9 x 5.5 in and 11 lb (the spec table says 10 lb) and no motor wattage. It was low in stock under $100 when we checked. Verdict: good value for a roller that can be motorised and washed; check the thickness claims before relying on them. We read NEWTRY's listing and specs; no hands-on use.
What stands out
- Hand crank or external motor
- 7 settings, 5.7 in sheets
- 1.5 mm and 6 mm cutters
- Water-washable body
Who it fits
Good fit for
Cooks who want a classic roller that can also run on a motor, and who like to rinse their machine.
Who should skip it
Anyone who needs a stated motor wattage or reliable thickness figures in mm.
Verdict: A washable roller with an optional motor.
NEWTRY QM-1-003 specs from the listing
NEWTRY QM-1-003 drive: crank or external motor
Switch between them as you like.
NEWTRY QM-1-003 sheet: 5.7 in, 7 settings
Listed 0.5 to 0.2 mm; check this.
NEWTRY QM-1-003 cutters: 1.5 mm and 6 mm
Thin spaghetti and fettuccine.
NEWTRY QM-1-003 size: 13.38 x 9 x 5.5 in, 11 lb
Weight listed as 10 lb elsewhere.
How the NEWTRY QM-1-003 is built
The body and cutter blades are food-grade stainless steel. The rollers take either a hand crank or the external motor at the side, the same layout many classic Italian rollers use for their optional motors. With no motor or gearbox inside, NEWTRY says the unit can be washed in water. The two cutters swap in and out. Motor wattage is not given.
Using the NEWTRY QM-1-003
Clamp or place the roller, fit the crank or motor, and pass the dough through level 1 first, stepping up towards level 7 for thinner sheets. Then run the sheet through the 1.5 mm or 6 mm cutter. With the motor on, you have both hands free to guide longer sheets.
Remove the motor before washing the body, and dry it fully before storing.
Before you buy the NEWTRY QM-1-003
The thickness numbers are the main doubt: 0.5 mm as the thickest setting would be thin for noodles, so the scale may be mislabelled. If you want built-in cutters and a fixed motor, NEWTRY's WXX392 has three widths and a 1-4 mm range but weighs 19.3 lb. A manual-only roller costs less if you never plan to use a motor.
Check before you buy
- NEWTRY thickness figures accepted as uncertain
- Motor wattage not needed
- Space near an outlet for the NEWTRY motor
- Fettuccine and thin spaghetti are enough
The product at a glance
NEWTRY Dual-Mode Stainless Steel Pasta Maker
Best for: Cooks who want an optional motor
- Operation Mode
- Manual crank, electric motor
- Thickness Settings
- 7
- Roller Width
- 5.7 inches
- Cut Widths
- 1.5 mm, 6 mm
- Housing Material
- Stainless steel
- Included Attachments
- Pasta Roller
View on Amazon: NEWTRY Dual-Mode Stainless Steel Pasta Maker Affiliate link
The NEWTRY QM-1-003 is a stainless roller that runs by crank or by a detachable external motor, with 7 settings on a 5.7 in sheet and 1.5 mm and 6 mm cutters. The body is washable; wattage is not listed.
Pros
- NEWTRY QM-1-003 works by hand or motor
- NEWTRY QM-1-003 body can be washed
- NEWTRY QM-1-003 costs under $100
Cons
- NEWTRY QM-1-003 thickness figures look off
- NEWTRY QM-1-003 motor wattage not listed
Good fit if
- You want a roller you can motorise and rinse
Skip if
- You need exact thickness figures
Verdict: A flexible crank-or-motor roller.
Specifications side by side
| Spec | NEWTRY Dual-Mode Stainless Steel Pasta Maker |
|---|---|
| Operation Mode | Manual crank, electric motor |
| Thickness Settings | 7 |
| Roller Width | 5.7 inches |
| Cut Widths | 1.5 mm, 6 mm |
| Housing Material | Stainless steel |
| Included Attachments | Pasta Roller |
| Application | Dough, Home |
| Pasta Type | Fettuccine |
| Color | Silver |
| Dimensions | 13.4 × 13.4 × 13.4 inches |
| Weight | 10 pounds |
| Size | small |
| Model | QM-1-003 |
Frequently asked questions
Can the NEWTRY QM-1-003 be used by hand?
Yes. Fit the crank for manual use or attach the external motor.
Can you wash the NEWTRY QM-1-003?
NEWTRY says the unit is water-washable because the motor is external; remove the motor first.
What cutters come with the NEWTRY QM-1-003?
1.5 mm thin spaghetti and 6 mm fettuccine.
How thick are NEWTRY QM-1-003 sheets?
NEWTRY lists 0.5 mm at level 1 to 0.2 mm at level 7, a narrow range worth confirming.
How heavy is the NEWTRY QM-1-003?
About 11 lb in the features, 10 lb in the spec table.
