Maxceysen MD150-II Electric Pasta Maker Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Maxceysen MD150-II looks like a classic hand-crank roller but has a 60 W motor built into the body, so there is no crank and no external motor taking space at the side. It has seven thickness settings and two cutter heads, 2 mm and 6.5 mm, for noodles, fettuccine, wonton and dumpling wrappers and lasagne sheets. The body is stainless steel; the listing gives 16 x 5.63 x 8.66 in and 13 lb, but no sheet width or thickness range in mm. Maxceysen is frank about the motor's limits: stiff dough can stall it or trip its overheating protection, so cut dough into 1 cm pieces and start at the widest setting; after a cut-out, wait at least half an hour. It was in stock under $120 when we checked. Verdict: a tidy motorised roller for soft to medium dough; 60 W is low, so firm egg doughs need patience. FOHERE sells what appears to be the same machine as the MMD150-II. This look at the MD150-II comes from its listing, not from our own use.
What stands out
- Built-in 60 W motor
- 7 thickness settings
- 2 mm and 6.5 mm cutter heads
- Stainless body, 13 lb
Who it fits
Good fit for
Cooks who want a motorised roller with a tidy built-in motor and the classic two cuts.
Who should skip it
Anyone who makes stiff, low-hydration dough often, or wants a stated thickness range.
Verdict: A tidy roller with a modest built-in motor.
Maxceysen MD150-II specs from the listing
Maxceysen MD150-II motor: 60 W, built in
Low power; feed small pieces.
Maxceysen MD150-II settings: 7
Range in mm not listed.
Maxceysen MD150-II cutters: 2 mm and 6.5 mm
Noodles and fettuccine.
Maxceysen MD150-II size: 16 x 5.63 x 8.66 in, 13 lb
Longer than a crank roller.
How the Maxceysen MD150-II is built
The stainless body carries the motor inside, which keeps the outline neat compared with rollers that hang a motor off one side. Two cutter heads fit on the main unit. An overheating cut-out protects the 60 W motor when the dough is too stiff. The listing does not say whether the rollers can also be turned by hand, or give the voltage.
Using the Maxceysen MD150-II
Cut the dough into pieces about 1 cm thick and start at the widest setting, as Maxceysen advises, then step down through the seven settings. Fit the 2 mm or 6.5 mm head to cut. If the motor slows or stops, the dough is too stiff: switch it off and let it rest for at least 30 minutes before trying again with softer dough.
No cleaning steps are listed; brush dry dough away instead of rinsing the motor body.
Before you buy the Maxceysen MD150-II
Think about your dough: 60 W is about half the 135 W of rollers like the Dyna-Living, and the overheat warning matters for stiff pasta doughs. Compare the FOHERE MMD150-II listing, which looks identical, on price. Confirm the voltage and plug with the seller.
Check before you buy
- Soft to medium dough
- Maxceysen voltage confirmed
- FOHERE MMD150-II price compared
- Space for a 16 in long machine
The product at a glance
Maxceysen Electric Stainless Steel Pasta Maker
Best for: Cooks who dislike hand cranking
- Operation Mode
- Electric motor
- Cut Widths
- 2 mm, 6.5 mm
- Housing Material
- Stainless steel
- Motor Wattage
- 60 W
- Included Attachments
- Pasta Roller
- Application
- Dough, Home
View on Amazon: Maxceysen Electric Stainless Steel Pasta Maker Affiliate link
The Maxceysen MD150-II is a stainless pasta roller with a built-in 60 W motor, seven settings and 2 mm and 6.5 mm cutter heads. It weighs 13 lb and has overheating protection for stiff dough.
Pros
- Maxceysen motor is built in, no side unit
- Maxceysen has two cutter heads
- Maxceysen costs under $120
Cons
- Maxceysen motor is only 60 W
- Maxceysen thickness range not listed
Good fit if
- You want a neat motorised roller for soft dough
Skip if
- You often roll stiff, dry dough
Verdict: A neat built-in-motor roller.
Specifications side by side
| Spec | Maxceysen Electric Stainless Steel Pasta Maker |
|---|---|
| Operation Mode | Electric motor |
| Cut Widths | 2 mm, 6.5 mm |
| Housing Material | Stainless steel |
| Motor Wattage | 60 W |
| Included Attachments | Pasta Roller |
| Application | Dough, Home |
| Pasta Type | Spaghetti, Fettuccine, Lasagna, Dumplings |
| Dimensions | 16 × 5.63 × 8.66 inches |
| Weight | 13 pounds |
| Color | Sliver |
| Model | MD150-II |
Frequently asked questions
How powerful is the Maxceysen MD150-II?
It has a 60 W built-in motor.
What does the Maxceysen MD150-II cut?
Noodles 2 mm and 6.5 mm wide, from two cutter heads.
Why does the Maxceysen MD150-II stop?
Stiff dough can trip its overheating protection; Maxceysen says to wait at least half an hour.
How many settings does the Maxceysen MD150-II have?
Seven; the mm range is not listed.
How heavy is the Maxceysen MD150-II?
13 lb, at 16 x 5.63 x 8.66 in.
Featured in
See also
- vevor electric pasta maker review
- yashe 3 in 1 pasta maker machine review
- crssbrohip 12 piece ravioli mold review
- best hand mixers under 30
- best stand mixers under 50
- 8 Best Stand Mixers Under $100, Compared
- Best Stand Mixers Under $150 in 2026: 10 Picks Ranked by Specs
- Best Stand Mixers Under $200: 8 Spec-Based Picks
- audrilo electric salad maker review
- igloo electric countertop ice maker review
