As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

MARCATO Atlas 180 Classic Pasta Machine Review (2026): A Spec-Based Look

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The MARCATO Atlas 180 Classic (AT-180-CLS) is the wide member of the Atlas family. The 180 in its name is the roller width in millimetres, against 150 mm on the common Atlas 150, so lasagne sheets come out about 3 cm wider and ravioli sheets hold more filling per pass. Unlike the Atlas 180 Slide, the Classic comes with a cutter, and Marcato lists three uses: lasagne sheets, fettuccine and tagliolini. The machine is made and assembled in Italy from chrome-plated steel, with anodized aluminium rollers, and is hand wash only. That is nearly all the AT-180-CLS listing says. It does not give the number of thickness positions, the cutter widths or whether it takes Marcato's Pastadrive motor, and its 9.88 oz weight cannot be right for a steel machine (the cutter-less Slide lists 5.25 lb). The box measures 23 x 20 x 16 cm. We read Marcato's listing and specs; we have not used this machine.

What stands out

  • AT-180-CLS rolls sheets 180 mm wide
  • Cutter for fettuccine and tagliolini included
  • Atlas 180 Classic made and assembled in Italy
  • Anodized aluminium rollers

Who it fits

Good fit for

Cooks who make lasagne, cannelloni or ravioli often and want wider sheets than a 150 mm machine gives, with the two classic ribbon cuts on the same machine.

Who should skip it

Buyers who want the thickness count, cutter sizes and motor fit confirmed in writing, or who mainly make spaghetti and short shapes.

Verdict: The wide Atlas with a cutter; a thin listing means you are buying on Marcato's name and the 180 mm roller.

Atlas 180 Classic specs, as listed

AT-180-CLS roller width: 180 mm (from the name)

About 3 cm wider sheets than an Atlas 150.

AT-180-CLS cuts: lasagne sheets, fettuccine, tagliolini

Two ribbon widths plus flat sheets.

AT-180-CLS body: chrome-plated steel, made in Italy

The classic Marcato build.

AT-180-CLS rollers: anodized aluminium

Food-safe surface; keep it dry.

AT-180-CLS thickness positions

Not stated on this listing.

AT-180-CLS weight: listed as 9.88 oz

Clearly a listing error for a steel machine.

How the Atlas 180 Classic is built

Like every Atlas, the 180 Classic is a box of chrome-plated steel with two smooth rollers, a side knob that sets the gap, a crank and a clamp to hold it to the table. The difference is the longer rollers, which make the body wider than an Atlas 150. A cutter section with two rollers handles fettuccine and tagliolini. The rollers are anodized aluminium, coloured by oxidation, which is why Marcato says hand wash only: water and detergent dull the surface.

Rolling pasta on the AT-180-CLS

Flatten a piece of dough by hand, run it through the widest gap, fold it and repeat a few times, then step the knob down one position per pass until the sheet is as thin as you want. Use the full 180 mm width for lasagne or ravioli, or feed the sheet through the cutter for fettuccine or tagliolini. Afterwards, let the dough scraps dry and brush them off; do not wash the rollers.

Before you buy the Atlas 180 Classic

Choose the Atlas 180 Classic if wide sheets matter and you also want fettuccine and tagliolini from one machine. Choose the Atlas 180 Slide if you only roll sheets for lasagne, ravioli or bakery work; its listing confirms 10 positions and Pastadrive motor fit. Choose an Atlas 150 if you want the widest range of Marcato add-on cutters.

Check before you buy

  • AT-180-CLS: you roll lasagne or ravioli sheets often
  • AT-180-CLS: fettuccine and tagliolini are enough cuts
  • AT-180-CLS: you will hand wash and dry-brush it
  • AT-180-CLS: a missing thickness count does not worry you

The product at a glance

Marcato Atlas 180 Manual Pasta Machine

Best for: Lasagne and ravioli cooks

Operation Mode
Manual
Housing Material
chrome-plated steel
Roller Material
anodized aluminum alloy
Pasta Type
Fettuccine, Lasagna, Tagliolini
Dimensions
9.5 × 8 × 6.37 inches
Weight
9.88 ounces

View on Amazon: Marcato Atlas 180 Manual Pasta Machine Affiliate link

MARCATO Atlas 180 Classic AT-180-CLS: Italian chrome-plated steel hand-crank pasta machine with 180 mm anodized aluminium rollers and a cutter for fettuccine and tagliolini; hand wash only.

Pros

  • AT-180-CLS sheets 180 mm wide
  • Cutter for two ribbon widths
  • Atlas 180 Classic made in Italy

Cons

  • Thickness count not listed for the AT-180-CLS
  • Listed weight is an error
  • Hand wash only

Good fit if

  • You want wider lasagne sheets with an AT-180-CLS

Skip if

  • You need spaghetti or shaped pasta

Verdict: Wide sheets with the classic cuts.

Specifications side by side

Spec Marcato Atlas 180 Manual Pasta Machine
Operation Mode Manual
Housing Material chrome-plated steel
Roller Material anodized aluminum alloy
Pasta Type Fettuccine, Lasagna, Tagliolini
Material Chrome Steel
Dimensions 9.5 × 8 × 6.37 inches
Weight 9.88 ounces
Size 23 x 20 x 16 cm
Color Chrome
Model AT-180-CLS

Frequently asked questions

How wide are the sheets from the Atlas 180 Classic?

The AT-180-CLS rolls sheets up to 180 mm, the number in its name.

What pasta can the Atlas 180 Classic cut?

Marcato lists lasagne sheets, fettuccine and tagliolini for the AT-180-CLS.

Is the Atlas 180 Classic dishwasher safe?

No; Marcato recommends hand washing the AT-180-CLS, and its anodized rollers should only be wiped or brushed.

How heavy is the AT-180-CLS?

The listing says 9.88 oz, which cannot be right for a chrome steel machine; the cutter-less Atlas 180 Slide lists 5.25 lb.

What is the difference between the Atlas 180 Classic and Slide?

The Classic includes a fettuccine and tagliolini cutter; the Slide is a roller only for sheets.

See also