Mangocore Stainless Steel Noodle Lattice Roller Cutter Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Mangocore noodle roller is a hand tool, not a machine: nine 304 stainless steel wheels sit side by side on one axle, so one pass over a rolled sheet cuts eight noodles of the same width. The listing also calls it a lattice and docker cutter. It is about 16 x 7 x 3.1 cm (5.98 x 2.99 x 2.01 in), has a hole in the handle for hanging, and was in stock under $10 when we checked. The listing does not give the gap between wheels, so the noodle width is unknown, and its 0.64 oz weight looks low for nine steel wheels. Verdict: a cheap, handy cutter for flat noodles from hand-rolled dough when you do not own a pasta machine. This review comes from the listing and published specs, not from use.
What stands out
- 9 wheels cut 8 strips per pass
- 304 stainless steel
- About 6 in long, hangs on a hook
- Costs under $10
Who it fits
Good fit for
Cooks who roll dough by hand and want even flat noodles or lattice strips without a pasta machine.
Who should skip it
Cooks who need a set noodle width, since the wheel spacing is not listed.
Verdict: A cheap stainless multi-wheel cutter for hand-rolled sheets.
Mangocore cutter specs from the listing
9 wheels, 8 strips per pass
Cuts many noodles of one width at once.
304 stainless steel
Listed as rust-resistant.
16 x 7 x 3.1 cm
About 5.98 x 2.99 x 2.01 in.
Wheel spacing not listed
Noodle width is not stated.
How the Mangocore cutter is built
A row of nine round blades turns on one axle inside a frame riveted to a handle. The listing says the handle has a hanging hole and that two rivets hold the frame. It calls the cut 360-degree, meaning the wheels roll freely in either direction.
Cutting noodles with the Mangocore roller
Roll the dough to an even thickness, flour the top and push the roller across the sheet in one straight stroke. Cross a second pass at an angle for a lattice pie top. Separate the strips and toss them in flour so they do not stick.
The listing gives no cleaning advice for the Mangocore; a brush clears dough from between the wheels.
Before you buy the Mangocore roller
Ask the seller for the wheel spacing if you need a particular noodle width. The listed 0.64 oz weight may be wrong. Other multi-wheel cutters with adjustable spacing let you change width, which this fixed tool does not.
Check before you buy
- Noodle width confirmed
- Hand-rolled dough as the use
- Brush for cleaning between wheels
- Hook or drawer space
The product at a glance
Mangocore Stainless Steel Noodle Roller Cutter
Best for: Hand-rolled noodles
- Application
- Dough
- Pasta Type
- Spaghetti
- Color
- Silver
- Dimensions
- 5.98 × 2.99 × 2.01 inches
- Weight
- 0.64 ounces
View on Amazon: Mangocore Stainless Steel Noodle Roller Cutter Affiliate link
The Mangocore noodle roller is a 304 stainless multi-wheel cutter with nine blades that cut eight even strips per pass from hand-rolled dough. It is about 6 in long with a hanging hole. Wheel spacing is not listed.
Pros
- Mangocore cuts eight strips at once
- Mangocore wheels are 304 stainless
- Mangocore costs under $10
Cons
- Mangocore noodle width not stated
- Mangocore listed weight looks wrong
Good fit if
- You roll dough by hand and want even noodles fast
Skip if
- You need a known, set noodle width
Verdict: A cheap multi-wheel noodle cutter.
Specifications side by side
| Spec | Mangocore Stainless Steel Noodle Roller Cutter |
|---|---|
| Application | Dough |
| Pasta Type | Spaghetti |
| Color | Silver |
| Dimensions | 5.98 × 2.99 × 2.01 inches |
| Weight | 0.64 ounces |
| Model | COMINHKPR116136 |
Frequently asked questions
How many noodles does the Mangocore cutter make per pass?
Eight, from nine wheels.
What is the Mangocore cutter made of?
304 stainless steel, per Mangocore.
How wide are Mangocore noodles?
The listing does not give the wheel spacing.
Can the Mangocore roller cut a lattice?
The listing calls it a lattice and docker cutter.
How long is the Mangocore roller?
About 16 cm, or 5.98 in.
See also
- nuvantee xk1005 manual pasta maker review
- la monferrina p6 pasta die review
- shule electric pasta maker ravioli roller review
- best hand mixers under 30
- best stand mixers under 50
- 8 Best Stand Mixers Under $100, Compared
- Best Stand Mixers Under $150 in 2026: 10 Picks Ranked by Specs
- Best Stand Mixers Under $200: 8 Spec-Based Picks
- danvard 316 marine grade stainless review
- hausmoda small 304 food grade stainless review
