LEONEBEBE Hand-Crank Pasta Maker with Built-in Cutters Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The LEONEBEBE hand-crank pasta maker is a clamp-on manual roller with built-in 2 mm and 4 mm cutters and six thickness settings. It is a solid pick for home cooks who want fresh spaghetti, fettuccine, lasagna sheets or dumpling wrappers without a motor. This review is based on the LEONEBEBE listing; we have not tested the machine.
What stands out
- Two cutters fixed in the frame
- Six-step thickness dial
- Red stainless frame on the LEONEBEBE
- Counter clamp for stability
- Compact 7.5 in footprint
Who it fits
Good fit for
Home cooks who make pasta now and then, ramen and dumpling fans, and anyone who prefers a manual machine with nothing to plug in.
Who should skip it
People who make pasta often in big batches, or who want extra cutter shapes beyond 2 and 4 mm.
Verdict: Good value if two noodle widths are all you need.
LEONEBEBE manual roller specs explained
Built-in cutters: 2 mm and 4 mm
Thin noodles and spaghetti-style strands, plus fettuccine, with no attachment swaps.
6 thickness settings, listed 0.1-5 mm
From thin wrappers to thick noodle sheets; the 0.1 mm figure looks optimistic.
Hand crank, no electricity
You control speed and feed directly.
About 7.5 x 6.5 x 5.6 in
Small enough to store in a cupboard.
Clamp, crank and cutters
The machine is a stainless steel body in red with the crank handle on the side. A countertop clamp holds it steady while you roll, so check that your table or counter edge has room for it.
Because both cutters sit in the frame, you move the crank from the roller slot to the cutter slot instead of fitting a separate cutting head.
Rolling and cutting at home
Feed a flattened piece of dough through the widest setting a few times, then step down the dial until the sheet is as thin as you want: thinner for wrappers and ravioli, thicker for noodles. Then pass the sheet through the 2 mm or 4 mm cutter.
LEONEBEBE says to brush away dry flour and dough, wipe the food-contact surfaces and dry the machine before storing; do not soak it.
Before buying this hand-crank roller
Only two cut widths are included and the listing names no extra cutter attachments. The stated 0.1 mm minimum is unlikely, so expect the thinnest sheet to be closer to a standard roller's. No weight or warranty term is given.
Check before you buy
- Measure your counter edge for the clamp
- Decide if 2 and 4 mm widths are enough
- Ask about warranty
The product at a glance
LEONEBEBE Manual Pasta Maker with Built-in Cutters
Best for: Manual pasta on a budget
- Operation Mode
- Manual crank
- Thickness Settings
- 6
- Cut Widths
- 2 mm, 4 mm
- Housing Material
- Stainless steel
- Pasta Type
- Spaghetti, Dumplings
- Color
- Red
View on Amazon: LEONEBEBE Manual Pasta Maker with Built-in Cutters Affiliate link
This LEONEBEBE (sold as LEONEB on the listing) is a manual, hand-crank pasta roller in red with two cutters built into the same body: 2 mm for thin noodles and spaghetti-style strands, 4 mm for fettuccine. A dial gives 6 thickness settings, which the listing describes as 0.1 to 5 mm; the 0.1 mm end is implausibly thin for a home roller, so treat it as a rough range. The stainless steel body fixes to the table with a clamp, needs no power, and is cleaned with a brush and a dry wipe. It measures about 7.5 x 6.5 x 5.6 in.
Pros
- 2 mm and 4 mm cutters are built in
- Six roller settings for sheets and wrappers
- LEONEBEBE roller clamps to the counter
- No power needed
Cons
- 0.1-5 mm range is doubtful at the thin end
- Only two cut widths
- Hand cranking needs a free hand to feed dough
Good fit if
- You want a cheap, no-fuss manual roller for spaghetti, fettuccine and dumpling sheets
Skip if
- You want motor-driven rolling; LEONEBEBE's 135W electric sheeter does the cranking for you
Verdict: A simple, affordable manual roller that covers the two most common noodle widths.
Specifications side by side
| Spec | LEONEBEBE Manual Pasta Maker with Built-in Cutters |
|---|---|
| Operation Mode | Manual crank |
| Thickness Settings | 6 |
| Cut Widths | 2 mm, 4 mm |
| Housing Material | Stainless steel |
| Pasta Type | Spaghetti, Dumplings |
| Color | Red |
| Dimensions | 6.7 × 7.5 × 5.5 inches |
| Size | 7.48"*6.49"*5.59" |
| Model | manual pasta machine 150 |
Frequently asked questions
What noodle widths does the LEONEBEBE hand-crank make?
2 mm and 4 mm from its two built-in cutters.
How many thickness settings does it have?
Six, listed as 0.1 to 5 mm.
Does the LEONEBEBE manual roller need power?
No, it is cranked by hand.
How do you clean the LEONEBEBE pasta roller?
Brush off flour and dough, wipe it and dry it before storage.
