JARYANNIX FT020335 Electric Noodle Press Review: Who It Fits
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The JARYANNIX FT020335 is an electric noodle press, meaning a motorized roller that flattens dough and feeds it to a cutter, and it suits a busy household or small shop that rolls a lot of firm, high-gluten dough. Its 550 W pure copper motor is far stronger than the 135 W home rollers, and JARYANNIX says it handles batch work without sticking or snapping strands. A 3 mm round knife cuts round noodles; sheets from the rollers also serve for dumpling and wonton skins or wide noodles cut by hand. Thickness is set with one adjusting rod that slides up and down on one side. The body is stainless steel, runs on 110 V, and stands 19.7 in tall on a 13.8 x 11.8 in base. The listing gives no weight, no thickness range and no other knife sizes, and it does not knead. Everything here comes from the JARYANNIX listing; we have not run dough through the FT020335.
Who it fits
Good fit for
Large households or small shops that roll firm noodle dough in quantity.
Who should skip it
Home cooks who want an extruder for penne, or a light machine to store in a drawer.
Verdict: A strong roller-press with one round knife; check size and weight with the seller.
FT020335 specs
FT020335 motor: 550 W pure copper
Handles firm, high-gluten dough.
FT020335 knife: 3 mm round
Round noodles; one size listed.
FT020335 thickness: single-side sliding rod
Range not listed.
FT020335 body: stainless steel
Resists rust, wipes clean.
FT020335 power: 110 V
US outlets.
FT020335 size: 13.8 x 11.8 x 19.7 in
Tall; weight not given.
FT020335 build
The FT020335 stacks a roller pair over a 3 mm round cutter in a stainless housing, with the copper motor below. A single rod on one side moves the roller gap, so you change sheet thickness by sliding it rather than turning a dial. The listing colour is yellow, probably for the trim.
Rolling on the FT020335
Knead firm dough separately, flatten it a little and feed it through the rollers at a wide setting, then slide the rod to thin it. Run the sheet through the 3 mm knife for round noodles, or cut sheets into dumpling or wonton wrappers by hand. Brush flour off the rollers after each session and wipe the stainless body.
FT020335 checks before ordering
Ask the seller for the weight and the thickness range, which the FT020335 listing leaves out. At 19.7 in tall it needs open space above the counter. Only the 3 mm round knife is named, so do not count on wider noodle cutters.
Check before you buy
- FT020335: you roll firm dough in quantity
- FT020335: 3 mm round noodles suit your recipes
- FT020335: you have 20 in of clearance
- FT020335: you knead dough separately
The product at a glance
JARYANNIX 550W Electric Pasta Press
Best for: Firm dough in quantity
- Operation Mode
- Electric motor
- Cut Widths
- 3mm
- Housing Material
- Stainless steel
- Motor Wattage
- 550W
- Application
- Commercial, Home
- Dimensions
- 13.8 × 11.8 × 19.7 inches
View on Amazon: JARYANNIX 550W Electric Pasta Press Affiliate link
JARYANNIX FT020335: 550 W copper-motor electric noodle press with a 3 mm round knife and sliding thickness rod; stainless, 110 V, 19.7 in tall. No weight listed.
Pros
- FT020335 550 W motor handles firm dough
- Stainless body
- Makes sheets for dumpling skins
Cons
- FT020335 lists only a 3 mm knife
- Weight and thickness range missing
- Tall body
Good fit if
- You roll heavy dough often and want the FT020335's 550 W motor
Skip if
- You want several noodle widths, which the FT020335 listing does not offer
Verdict: A strong round-noodle press for heavy use.
Specifications side by side
| Spec | JARYANNIX 550W Electric Pasta Press |
|---|---|
| Operation Mode | Electric motor |
| Cut Widths | 3mm |
| Housing Material | Stainless steel |
| Motor Wattage | 550W |
| Application | Commercial, Home |
| Dimensions | 13.8 × 11.8 × 19.7 inches |
| Color | Yellow |
| Model | FT020335 |
Frequently asked questions
Does the JARYANNIX FT020335 knead dough?
No. The FT020335 rolls and cuts dough you have already kneaded.
What noodle size does the FT020335 cut?
The FT020335 listing names a 3 mm round knife only.
How powerful is the JARYANNIX FT020335?
It has a 550 W pure copper motor on 110 V.
How is FT020335 thickness set?
With a single adjusting rod that slides up and down on one side of the FT020335.
Can the FT020335 make dumpling wrappers?
Yes. JARYANNIX lists FT020335 sheets for dumpling and wonton skins.
Featured in
See also
- keouke g851 collapsible pasta drying rack review
- yimohome 180 commercial electric pasta sheeter review
- ginxesh 3 in 1 manual pasta machine review
- best hand mixers under 30
- best stand mixers under 50
- 8 Best Stand Mixers Under $100, Compared
- Best Stand Mixers Under $150 in 2026: 10 Picks Ranked by Specs
- Best Stand Mixers Under $200: 8 Spec-Based Picks
- aptliton 16 electric stainless steel review
- vnatwgoo stainless steel electric potato review
