As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Imperia 4501 La Fabbrica della Pasta Gift Set Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Imperia 4501 La Fabbrica della Pasta is a gift box built around the iPasta hand-crank roller. The iPasta makes 150 mm sheets at six thicknesses and cuts 6.5 mm fettuccine and 2 mm tagliolini. Three extras fill the box: the Raviolamp mold for 24 square ravioli of 34 x 34 mm, the Duplex cutter for 12 mm lasagnette and 2 mm spaghetti, and the MilleGnocchi for cavatelli, Sardinian gnocchetti and rigatelli. A wooden rolling pin, a cleaning brush, a non-slip base, a table clamp and the crank complete it. Verdict: the 4501 is the most complete Imperia starter kit for someone who wants four ribbon widths, ravioli and small gnocchi shapes from one box, all made in Italy; if you only need sheets and two cuts, the plain iPasta does that alone. We read Imperia's listing and specs for this review and did not use the set.

What stands out

  • iPasta roller: 150 mm sheets, 6 thicknesses
  • Four ribbon widths: 2, 6.5 and 12 mm plus 2 mm spaghetti
  • Raviolamp mold for 24 ravioli at a time
  • MilleGnocchi for cavatelli and gnocchetti

Who it fits

Good fit for

Cooks starting out with Imperia who want ravioli, ribbons and small gnocchi shapes covered in one made-in-Italy box.

Who should skip it

Cooks who already own an Imperia roller, or who want a motor: the iPasta in this set is hand-cranked, with the PastaFacile 4600 motor sold separately.

Verdict: Imperia's full manual pasta kit in one gift box.

What the 4501 set contains

4501 roller: iPasta, 150 mm, 6 thicknesses

Cuts 6.5 mm fettuccine and 2 mm tagliolini.

4501 Raviolamp: 24 ravioli, 34 x 34 mm

One sheet makes two dozen squares.

4501 Duplex cutter: 12 mm + 2 mm

Lasagnette and spaghetti.

4501 box: 14 x 8.78 x 8.78 in, 7.94 lb

Includes crank, clamp, brush, rolling pin.

How the 4501 set is built

The 4501 iPasta has chromed steel rollers and cutters, a crank handle and a table clamp, plus a non-slip base for counters where a clamp will not fit. The Duplex is steel and slides onto the iPasta's side guides for cutting accessories. The MilleGnocchi uses wooden rollers in a steel frame, and the set's rolling pin is wood. Imperia says the whole kit is made in Italy. The listing does not give the thickness of each setting in millimetres.

Using the 4501 set

Roll dough through the 4501 iPasta from the widest setting down, then cut it on the built-in heads or move to the Duplex for lasagnette or spaghetti. For ravioli, lay one sheet on the Raviolamp, press it into the cups, fill, cover with a second sheet and roll the pin across to seal and cut 24 squares. Thin ropes of dough fed through the MilleGnocchi come out as cavatelli or gnocchetti.

Imperia says to clean the 4501 pieces with a damp cloth or the supplied brush; keep the rollers away from water.

Before you buy the 4501 set

Choose the Imperia 4501 if you want ravioli, four ribbon widths and gnocchi shapes in one box. Choose the iPasta 150 on its own if sheets, fettuccine and tagliolini are enough, and add the Raviolamp or Duplex later. If you want a motor, check that the PastaFacile 4600 fits your budget, since the 4501 iPasta is listed as compatible with it.

Check before you buy

  • Counter edge for the 4501 clamp, or use the non-slip base
  • Storage for four Imperia pieces
  • Brush and cloth cleaning only
  • Motor needs checked (PastaFacile 4600 sold apart)

The product at a glance

Imperia IPASTA Manual Pasta Machine Set

Best for: New Imperia owners wanting ravioli too

Operation Mode
Manual crank
Thickness Settings
6
Roller Width
150 mm
Cut Widths
2 mm, 6.5 mm, 12 mm
Housing Material
Steel
Roller Material
Chromed steel

View on Amazon: Imperia IPASTA Manual Pasta Machine Set Affiliate link

The Imperia 4501 La Fabbrica della Pasta set pairs the iPasta 150 mm hand-crank roller with the Raviolamp 24-ravioli mold, the Duplex 12 mm/2 mm cutter and the MilleGnocchi, all made in Italy.

Pros

  • 4501 covers ravioli, ribbons and gnocchi
  • 4501 Duplex adds 12 mm lasagnette
  • 4501 iPasta takes the 4600 motor

Cons

  • 4501 roller is hand-crank only
  • 4501 lists no mm per thickness step

Good fit if

  • You want a complete Imperia starter box

Skip if

  • You already own an Imperia roller

Verdict: The complete manual Imperia kit.

Specifications side by side

Spec Imperia IPASTA Manual Pasta Machine Set
Operation Mode Manual crank
Thickness Settings 6
Roller Width 150 mm
Cut Widths 2 mm, 6.5 mm, 12 mm
Housing Material Steel
Roller Material Chromed steel
Included Attachments Ravioli Maker
Pasta Type Ravioli
Material Wood
Dimensions 14 × 8.78 × 8.78 inches
Weight 7.94 pounds
Size one size
Color Chromed
Model 4501

Frequently asked questions

What comes in the Imperia 4501 set?

The iPasta roller, the Raviolamp 24-ravioli mold, the Duplex cutter, the MilleGnocchi, a crank, a wooden rolling pin, a brush, a non-slip base, a table clamp and a manual.

What widths does the 4501 set cut?

The 4501 iPasta cuts 6.5 mm fettuccine and 2 mm tagliolini; the Duplex adds 12 mm lasagnette and 2 mm spaghetti.

How big are the 4501 Raviolamp ravioli?

34 x 34 mm squares, 24 per sheet with the 4501 Raviolamp.

Can the 4501 iPasta take a motor?

Imperia lists the 4501 iPasta as compatible with the PastaFacile 4600 motor.

Is the 4501 set made in Italy?

Yes, Imperia says the 4501 machine and accessories are made in Italy.

See also