GuanQiao PMA04 KitchenAid Fettuccine Cutter Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The GuanQiao JE-KA-PMA04 is one piece of GuanQiao's KitchenAid pasta line: a stainless steel fettuccine cutter that fits the attachment hub of KitchenAid stand mixers (GuanQiao says all of them). It cuts sheets you have already rolled; it does not roll dough itself, so you need a sheet roller attachment or a hand roller first. The listing gives a size of about 9 x 2 x 3 in, a polished surface and an included cleaning brush, but no cut width. Verdict: the PMA04 makes sense for KitchenAid owners who already have a roller and want fettuccine as a second cut; if you have no roller, GuanQiao's 3-piece set (JE-KA-PMA01) is the more complete buy. It was in stock under $40 when we looked. We base this on GuanQiao's listing; several lines in it describe the roller rather than this cutter, so we have used only the facts that apply to a cutter.
Who it fits
Good fit for
KitchenAid owners who already roll sheets with an attachment or by hand and want machine-cut fettuccine.
Who should skip it
Owners of other mixer brands, anyone without a sheet roller, and cooks who need a stated cut width.
Verdict: A fettuccine add-on for an existing KitchenAid pasta setup.
GuanQiao JE-KA-PMA04 specs from the listing
GuanQiao fit: KitchenAid stand mixer hub
GuanQiao says all KitchenAid stand mixers.
GuanQiao cut: fettuccine
Width not given in the listing.
GuanQiao size: about 9 x 2 x 3 in
Compact enough for a drawer.
GuanQiao extras: cleaning brush
For clearing dough from the blades.
How the GuanQiao PMA04 is built
The PMA04 is a stainless steel cutter head with a polished finish and a drive shaft that locks into the KitchenAid power hub. GuanQiao sells it next to a spaghetti cutter (JE-KA-PMA03) and a 3-piece set with a sheet roller (JE-KA-PMA01). The listing does not give the cutter's width, roller length or weight.
Using the GuanQiao PMA04
Roll and dust your sheets first, then fit the PMA04 to the KitchenAid hub and run the mixer at a low speed. Feed one sheet at a time into the top of the cutter and catch the ribbons below.
Let any dough in the blades dry, then clear it with the included brush. The listing does not say whether the cutter can be washed with water, so stick to dry brushing as with most steel cutter heads.
Before you buy the GuanQiao PMA04
Choose the GuanQiao PMA04 if you already own a KitchenAid sheet roller and only lack a fettuccine cutter. Choose the GuanQiao JE-KA-PMA01 3-piece set if you need the sheet roller as well. If you mainly make thin noodles, the JE-KA-PMA03 spaghetti cutter is the matching piece.
Check before you buy
- A KitchenAid mixer with a front hub for the GuanQiao cutter
- A sheet roller already in your kit
- Dry brushing after each GuanQiao session
- No need for a stated cut width
The product at a glance
GuanQiao KitchenAid Fettuccine Cutter Attachment
Best for: KitchenAid roller owners
- Operation Mode
- Mixer attachment
- Housing Material
- Stainless steel
- Included Attachments
- Fettuccine Cutter
- Color
- Silver
- Dimensions
- 9 × 2 × 3 inches
View on Amazon: GuanQiao KitchenAid Fettuccine Cutter Attachment Affiliate link
The GuanQiao JE-KA-PMA04 is a stainless fettuccine cutter for the KitchenAid hub, about 9 x 2 x 3 in, with a cleaning brush. It cuts rolled sheets and needs a separate roller.
Pros
- GuanQiao cutter fits the KitchenAid hub
- GuanQiao cutter is polished stainless
- GuanQiao includes a cleaning brush
Cons
- GuanQiao gives no cut width
- GuanQiao cutter needs a separate roller
Good fit if
- You own a KitchenAid sheet roller
Skip if
- You have no way to roll sheets yet
Verdict: A fettuccine add-on for KitchenAid owners.
Specifications side by side
| Spec | GuanQiao KitchenAid Fettuccine Cutter Attachment |
|---|---|
| Operation Mode | Mixer attachment |
| Housing Material | Stainless steel |
| Included Attachments | Fettuccine Cutter |
| Pasta Type | Fettuccine |
| Color | Silver |
| Dimensions | 9 × 2 × 3 inches |
| Size | Fettuccine Cutter |
| Model | JE-KA-PMA04 |
Frequently asked questions
Does the GuanQiao PMA04 roll dough?
No, it only cuts sheets into fettuccine; you need a sheet roller first.
Which mixers does the GuanQiao PMA04 fit?
GuanQiao says all KitchenAid stand mixers, through the attachment hub.
How wide are the GuanQiao PMA04 ribbons?
The listing does not state the cut width.
What comes with the GuanQiao PMA04?
The cutter and a cleaning brush.
Does GuanQiao sell a spaghetti cutter too?
Yes, the JE-KA-PMA03, and a 3-piece set with a roller, the JE-KA-PMA01.
