BNYTXV Pasta Machine Crank and Clamp Replacement Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This BNYTXV part pair replaces a lost or broken crank handle and table clamp on a manual pasta machine. Both are metal. The listing says they fit Atlas Marcato models; the clamp's frame slots into the bottom of the machine and grips a counter or table up to 7 cm thick. It was in stock at under $8 when we checked, far cheaper than a new machine. The listing is short and loosely written: it does not name which Atlas models, does not say whether the crank fits other brands, and its 0.35 oz weight and 12.6 x 3.94 x 3.15 in size look like packaging figures. Verdict: a cheap fix for a Marcato Atlas owner who lost the crank or clamp, as long as the seller confirms the fit. We judged it from the listing and published specs, not from use.
What stands out
- Metal crank handle and holding clip
- Listed for Marcato Atlas machines
- Clamps counters up to 7 cm
- Under $8
Who it fits
Good fit for
Marcato Atlas owners who lost or broke the crank or clamp and want a cheap replacement.
Who should skip it
Owners of other brands' machines unless the seller confirms the fit, and buyers who want an original Marcato part.
Verdict: A cheap replacement crank and clamp for Atlas machines.
BNYTXV part specs from the listing
Crank + holding clip
Both pieces in metal.
Fit: Atlas Marcato models
Exact Atlas models are not named.
Clamp limit: 7 cm
Will not fix to a counter thicker than 7 cm.
Listed 12.6 x 3.94 x 3.15 in, 0.35 oz
Likely package data, not the parts.
What the BNYTXV parts are
The crank fits the drive socket of the machine's rollers, and the holding clip is a frame that pushes into the base of the machine and screws to the counter edge. The listing does not say whether the crank also turns the cutter block or how the clamp tightens.
Using the BNYTXV crank and clamp
Push the clip frame firmly into the bottom of the machine, tighten it on a counter or table edge no thicker than 7 cm, then fit the crank. The listing says the machine can then roll noodle dough and wrappers for dumplings and wontons as usual.
Wipe the metal parts dry after use; the listing gives no care advice.
Before you buy the BNYTXV parts
Send the seller your machine's model and ask for confirmation that the crank shaft and clip fit. Measure your counter edge against the 7 cm limit. Marcato sells original cranks and clamps if an exact match matters more than price.
Check before you buy
- Machine model sent to the seller
- Counter edge under 7 cm
- Crank and clamp both needed
- Original-part price compared
The product at a glance
BNYTXV Metal Pasta Maker Holding Clip
Best for: Marcato Atlas owners missing parts
- Operation Mode
- Manual
- Dimensions
- 12.6 × 3.94 × 3.15 inches
- Weight
- 0.35 ounces
View on Amazon: BNYTXV Metal Pasta Maker Holding Clip Affiliate link
The BNYTXV part is a metal replacement crank and table clamp for manual pasta machines, listed for Marcato Atlas models. The clamp grips counters up to 7 cm. Exact model fit is not listed.
Pros
- BNYTXV saves buying a new machine
- BNYTXV parts are metal
- BNYTXV costs under $8
Cons
- BNYTXV fit list is vague
- BNYTXV listed size and weight look wrong
Good fit if
- You lost the crank or clamp of a Marcato Atlas
Skip if
- Your machine is another brand and fit is unconfirmed
Verdict: A cheap crank and clamp replacement.
Specifications side by side
| Spec | BNYTXV Metal Pasta Maker Holding Clip |
|---|---|
| Operation Mode | Manual |
| Dimensions | 12.6 × 3.94 × 3.15 inches |
| Weight | 0.35 ounces |
| Size | holding clip |
| Color | as picture show |
| Model | 15897868020696 |
Frequently asked questions
Which pasta machines do the BNYTXV parts fit?
The listing names Atlas Marcato models without a model list.
What is included with the BNYTXV part?
A metal crank handle and a holding clip.
How thick a table can the BNYTXV clamp hold?
Up to 7 cm.
Are the BNYTXV crank and clip metal?
Yes, both are listed as metal.
Is the BNYTXV a full pasta machine?
No, it is a replacement crank and clamp only.
Featured in
See also
- veohome pasta maker drying rack ravioli mold review
- bottene torchio bigolaro hand press review
- kimairy noodle cutter roller review
- best hand mixers under 30
- best stand mixers under 50
- 8 Best Stand Mixers Under $100, Compared
- Best Stand Mixers Under $150 in 2026: 10 Picks Ranked by Specs
- Best Stand Mixers Under $200: 8 Spec-Based Picks
- shchy clip on earbuds review
- cuisinart coffee maker review
