9 Best Silver Pasta Makers, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Our top pick among 9 silver pasta makers is the Imperia IPasta Classic 4110: a chromed steel roller made in Italy that rolls 0.5-5 mm sheets, cuts fettuccine and tagliolini, and takes Imperia's motor and add-on heads. The MZTOGR MZ-150PR adds a ravioli head and drying rack, the GVODE G2503-5 is the stainless electric roller, the Sailnovo, YASHE, Nuvantee and Zenadora are lower-cost rollers, Fante's 15500 makes cavatelli and the QWORK is a cheap noodle press. A KitchenAid roller set that is out of stock, a Marcato spaghetti head, lattice cutters and a dumpling mold were removed, and the Reemix QF-150 was folded into the YASHE pick as the same machine. Picks rest on listing data, not testing.
Our top pick: Imperia IPasta Classic Manual Pasta Maker.
Quick picks
The best fit for you
- A made-in-Italy roller that can take a motor Imperia IPasta Classic Manual Pasta Maker Imperia IPasta 4110.
- Ravioli plus a drying rack MZTOGR Manual 3-in-1 Pasta Maker MZTOGR MZ-150PR kit.
- Electric rolling in a steel body GVODE 3-in-1 Electric Pasta Maker GVODE G2503-5.
- Nine settings for fine control Sailnovo 9-Setting Manual Pasta Maker Silver Sailnovo.
- A roller that ships with a brush and cloth YASHE Stainless Steel Manual Pasta Maker YASHE QF-150.
- An all-stainless roller cheaply Nuvantee Stainless Steel Manual Pasta Maker Nuvantee XK1005.
- A roller with non-slip pads Zenadora Manual Pasta Roller 7 Settings Zenadora CAPM002.
- Cavatelli Fante's Cast Aluminum Cavatelli Maker Fante's 15500.
- Noodles for the least money QWORK Manual Noodle Maker, 5 Moulds QWORK hand press.
Our 9 picks
Imperia IPasta Classic Manual Pasta Maker
Best for: Serious home pasta makers
- Color
- Silver (what this guide is about)
- Operation Mode
- Manual crank
- Thickness Settings
- 6
- Roller Width
- 150mm
- Cut Widths
- 2mm, 6.5mm
- Housing Material
- Steel
View on Amazon: Imperia IPasta Classic Manual Pasta Maker Affiliate link
The silver Imperia IPasta Classic 4110 is a chromed steel roller made in Italy. It rolls 150 mm sheets at six heights from 0.5 to 5 mm and cuts 6.5 mm fettuccine and 2 mm tagliolini. A side slot takes Imperia's Pasta Facile 4600 motor, and it works with Simplex and Duplex cutter heads and the Raviolamp. A cotton storage pouch, brush, non-slip base and wooden-handled crank come in the box.
Pros
- 0.5-5 mm sheets on the IPasta 4110
- Slot for the Pasta Facile motor
- Cotton pouch for storage
Cons
- Only six IPasta heights
- Weight not given; stock was low
Good fit if
- You want an Italian roller that grows with motor and add-ons
Skip if
- You want the most thickness steps
Verdict: The IPasta Classic is the silver machine to build around.
MZTOGR Manual 3-in-1 Pasta Maker
Best for: Ravioli makers
- Color
- Silver (what this guide is about)
- Operation Mode
- Manual Hand Crank
- Thickness Settings
- 9
- Cut Widths
- 2mm, 7mm
- Housing Material
- Stainless steel
- Roller Material
- Carbon steel with a plated coating
View on Amazon: MZTOGR Manual 3-in-1 Pasta Maker Affiliate link
The MZTOGR MZ-150PR is a stainless steel hand-crank roller with carbon steel rollers, nine settings from 0.5 to 2.5 mm and a dual cutter for 2 mm spaghetti and 7 mm fettuccine. It also ships a ravioli attachment that makes 3 cm squares with wavy edges and a drying rack, so the whole job from sheet to drying is covered. It weighs 6.47 lb.
Pros
- Ravioli head makes 3 cm squares
- Drying rack in the MZ-150PR box
- 7 mm wide fettuccine
Cons
- Thickest MZTOGR sheet is 2.5 mm
- Plated carbon steel rollers
Good fit if
- You want ravioli and noodles from one manual set
Skip if
- You need sheets thicker than 2.5 mm
Verdict: The MZ-150PR is the all-in-one silver kit.
GVODE 3-in-1 Electric Pasta Maker
Best for: Frequent pasta nights
- Color
- Silver (what this guide is about)
- Operation Mode
- Electric motor
- Thickness Settings
- 8
- Housing Material
- Stainless steel
- Roller Material
- Stainless steel
- Motor Wattage
- 700W
View on Amazon: GVODE 3-in-1 Electric Pasta Maker Affiliate link
The GVODE G2503-5 is the stainless steel version of GVODE's electric roller: a metal shell over metal drive gears, a 700 W peak rating, two speeds, reverse and eight settings from 0.4 to 2 mm. The 3-in-1 head rolls sheets and cuts fettuccine and spaghetti. GVODE asks for 15-minute runs with 5-minute rests and says the steel shell sheds heat faster than plastic. Weight is not listed.
Pros
- Stainless G2503-5 shell resists dents
- G2503-5 has a reverse gear
- 3-in-1 sheet and cutter head
Cons
- G2503-5 needs 5-minute cool-downs
- No weight listed
Good fit if
- You want motor-rolled pasta in a steel body
Skip if
- You want sheets over 2 mm
Verdict: The G2503-5 is the silver electric roller.
Sailnovo 9-Setting Manual Pasta Maker
Best for: Dumpling skins and spaghetti
- Color
- Silver (what this guide is about)
- Operation Mode
- Manual
- Thickness Settings
- 9
- Cut Widths
- 2.0 mm, 4.5 mm
- Housing Material
- Stainless steel
- Roller Material
- Aluminum
View on Amazon: Sailnovo 9-Setting Manual Pasta Maker Affiliate link
The silver Sailnovo 3-in-1 is a stainless steel roller with aluminium rollers and a knob with nine thickness settings up to 3 mm; Sailnovo says repeated passes get dumpling skins to 0.5 mm. Its cutter makes 2.0 mm and 4.5 mm noodles. The blade unit should never be washed with water; use a brush or a wooden pick. The listing weight is 2.72 kg (about 6 lb).
Pros
- Silver Sailnovo: nine knob settings
- Sheets up to 3 mm thick
- Narrow 4.5 mm ribbon cutter
Cons
- No water on the Sailnovo blades
- Near $50 in silver
Good fit if
- You want nine settings in a stainless body
Skip if
- You want a wide fettuccine
Verdict: The silver Sailnovo is a fine-control roller.
YASHE Stainless Steel Manual Pasta Maker
Best for: Tidy cooks
- Color
- Silver (what this guide is about)
- Operation Mode
- Manual crank
- Cut Widths
- 2 mm, 6.5 mm
- Housing Material
- Stainless steel, aluminum alloy
- Included Attachments
- Pasta Roller
- Pasta Type
- Spaghetti, Fettuccine, Lasagna
View on Amazon: YASHE Stainless Steel Manual Pasta Maker Affiliate link
The YASHE QF-150 is a stainless steel and aluminium alloy roller with a dial from 0.3 to 3 mm and a dual cutter for 2 mm spaghetti and 6.5 mm fettuccine. A cleaning brush and cloth come in the box, a clamp fixes it to the table, and it weighs 6.39 lb. Reemix sells the same QF-150 machine.
Pros
- YASHE adds brush and cloth
- 0.3 mm thinnest YASHE sheet
- 6.39 lb, steady while cranking
Cons
- Aluminium parts, hand care only
- YASHE does not count the dial steps
Good fit if
- You want a roller with cleaning tools included
Skip if
- You want stainless parts throughout
Verdict: The YASHE QF-150 is the easy-care silver roller.
Nuvantee Stainless Steel Manual Pasta Maker
Best for: Budget stainless fans
- Color
- Silver (what this guide is about)
- Operation Mode
- Manual
- Thickness Settings
- 7
- Cut Widths
- 2.0 mm, 6 mm
- Housing Material
- Stainless steel
- Pasta Type
- Spaghetti, Fettuccine, Lasagna, Dumplings
View on Amazon: Nuvantee Stainless Steel Manual Pasta Maker Affiliate link
The silver Nuvantee XK1005 is made of stainless steel throughout, per Nuvantee, with seven thickness settings from 3 mm down to 0.5 mm and a cutter for 2.0 mm and 6 mm noodles. It clamps to the table, comes with a manual and weighs 5.95 lb.
Pros
- Nuvantee says 100% stainless
- XK1005 steps from 3 to 0.5 mm
- Nuvantee 2.0 and 6 mm cutter
Cons
- Seven XK1005 steps
- No brush in the box
Good fit if
- You want an all-stainless roller for little money
Skip if
- You want the thinnest sheets possible
Verdict: The XK1005 is the low-cost stainless roller.
Zenadora Manual Pasta Roller 7 Settings
Best for: Beginners
- Color
- Silver (what this guide is about)
- Operation Mode
- Manual crank
- Thickness Settings
- 7
- Cut Widths
- 2.0mm, 4.5mm
- Housing Material
- Stainless steel
- Roller Material
- Steel
View on Amazon: Zenadora Manual Pasta Roller 7 Settings Affiliate link
The Zenadora CAPM002 is a stainless steel roller with a pull-and-turn knob for seven thickness levels, dual blades for 2.0 mm spaghetti and 4.5 mm fettuccine, a heavy-duty clamp and four built-in non-slip pads. Zenadora says never wash it with water and to add a drop of cooking oil if the crank gets stiff. It weighs 5 lb.
Pros
- Four non-slip pads under the CAPM002
- Pull-and-turn thickness knob
- Oil tip for a stiff crank
Cons
- No millimetre range for the CAPM002 rollers
- 4.5 mm is a narrow fettuccine
Good fit if
- You want a roller that stays put on smooth counters
Skip if
- You want wide ribbons
Verdict: The CAPM002 is the steady, simple silver roller.
Fante's Cast Aluminum Cavatelli Maker
Best for: Southern Italian cooking
- Color
- Silver (what this guide is about)
- Housing Material
- non-stick cast aluminum
- Dimensions
- 9.5 × 4 × 5.5 inches
- Weight
- 1 pounds
View on Amazon: Fante's Cast Aluminum Cavatelli Maker Affiliate link
Fante's Cousin Elisa's Cavatelli Maker 15500 is a non-stick cast aluminium shaper: cut rolled dough into strips, feed them in and turn the handle to get ridged cavatelli. Its clamp fits counters up to 1.365 in thick, and it can be hand washed in warm soapy water. It measures 9.25 x 4.4 x 5.75 in and weighs 1 lb.
Pros
- Cast aluminium 15500 is non-stick
- Washable in soapy water
- Fante's family recipes included
Cons
- Clamp only fits up to 1.365 in
- Makes cavatelli, nothing else
Good fit if
- You want ridged cavatelli at home
Skip if
- You want long pasta
Verdict: The Fante's 15500 is the one-shape cavatelli tool.
QWORK Manual Noodle Maker, 5 Moulds
Best for: Occasional noodle makers
- Color
- Silver (what this guide is about)
- Operation Mode
- Manual
- Housing Material
- Stainless steel
- Dimensions
- 7.2 × 7.2 × 2.5 inches
View on Amazon: QWORK Manual Noodle Maker, 5 Moulds Affiliate link
The QWORK QS35489 is a stainless steel hand press: fill the drum with dough and press it through one of five noodle moulds. It is about 18 cm tall with a 14 cm drum, and QWORK says the press is sealed against dough leaks. It is the cheapest pick, but it makes pressed noodles only.
Pros
- Cheapest silver pasta tool here
- Five QWORK moulds
- Sealed press stops leaks
Cons
- Pressed noodles only
- Mould sizes not listed
Good fit if
- You want fresh noodles for very little
Skip if
- You want sheets or ribbons
Verdict: The QWORK is the low-cost noodle press.
Specifications side by side
| Spec | Imperia IPasta Classic Manual Pasta Maker | MZTOGR Manual 3-in-1 Pasta Maker | GVODE 3-in-1 Electric Pasta Maker | Sailnovo 9-Setting Manual Pasta Maker | YASHE Stainless Steel Manual Pasta Maker | Nuvantee Stainless Steel Manual Pasta Maker | Zenadora Manual Pasta Roller 7 Settings | Fante's Cast Aluminum Cavatelli Maker | QWORK Manual Noodle Maker, 5 Moulds |
|---|---|---|---|---|---|---|---|---|---|
| Operation Mode | Manual crank | Manual Hand Crank | Electric motor | Manual | Manual crank | Manual | Manual crank | not stated | Manual |
| Thickness Settings | 6 | 9 | 8 | 9 | not stated | 7 | 7 | not stated | not stated |
| Roller Width | 150mm | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Cut Widths | 2mm, 6.5mm | 2mm, 7mm | not stated | 2.0 mm, 4.5 mm | 2 mm, 6.5 mm | 2.0 mm, 6 mm | 2.0mm, 4.5mm | not stated | not stated |
| Housing Material | Steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel, aluminum alloy | Stainless steel | Stainless steel | non-stick cast aluminum | Stainless steel |
| Roller Material | Chromed steel | Carbon steel with a plated coating | Stainless steel | Aluminum | not stated | not stated | Steel | not stated | not stated |
| Motor Wattage | not stated | not stated | 700W | not stated | not stated | not stated | not stated | not stated | not stated |
| Included Attachments | not stated | Pasta Roller, Ravioli Maker | not stated | Pasta Roller | Pasta Roller | not stated | Pasta Roller | not stated | not stated |
| Pasta Type | Fettuccine, Lasagna | Ravioli | Spaghetti, Fettuccine | Spaghetti, Fettuccine, Lasagna | Spaghetti, Fettuccine, Lasagna | Spaghetti, Fettuccine, Lasagna, Dumplings | not stated | not stated | not stated |
| Color | Silver | Silver | Silver | Silver | Silver | Silver | Silver | Silver | Silver |
| Material | Wood | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Dimensions | 6.69 × 8.07 × 7.28 inches | 8.46 × 3.38 × 3.38 inches | 11.4 × 10.3 × 6.53 inches | 11.8 × 7.09 × 9.45 inches | 9.76 × 8.98 × 6.69 inches | 5.39 × 6.89 × 8.5 inches | not stated | 9.5 × 4 × 5.5 inches | 7.2 × 7.2 × 2.5 inches |
| Weight | not stated | 6.47 pounds | not stated | 2.72 kilograms | 6.39 pounds | 5.95 pounds | 5 pounds | 1 pounds | not stated |
| Size | one size | MZ-150PR | Gvode Electric Stainless Steel Pasta Maker Machine | 9.4x11.8x7 inches | M | not stated | 7 Thickness | Classic Cavatelli | not stated |
| Model | 4110 | MZ-150PR | G2503-5 | Machine1 | QF-150 | XK1005 | CAPM002 | 15500 | QS35489 |
If you want to match countertop equipment by finish, you can evaluate motor wattage and capacity specifications for the best silver juicers.
Choosing a silver pasta maker
-
Thickness range
The IPasta reaches 5 mm for thick sheets; most others stop at 2.5-3 mm.
-
Add-ons
Only the IPasta takes a motor and Imperia's Simplex, Duplex and Raviolamp heads.
-
Cutter widths
Fettuccine widths run from 4.5 mm (Sailnovo, Zenadora) to 7 mm (MZTOGR).
-
Counter grip
Check the clamp: Fante's fits counters up to 1.365 in; the Zenadora adds rubber pads.
Frequently asked questions
Which silver pasta maker can I motorise later?
The Imperia IPasta 4110, through its side slot for the Pasta Facile 4600 motor.
Is the Reemix QF-150 a different machine from the YASHE?
Both carry the QF-150 model code and the same specs, so we list it once.
Which silver machine makes ravioli?
The MZTOGR MZ-150PR includes a ravioli head for 3 cm squares.
Can any of these go in water?
Only Fante's cavatelli maker; the rollers are brushed or wiped dry.








