As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

AstrumForge Commercial Manual Pasta Maker Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The AstrumForge OT-ZMWHY-2795 is a heavy-duty manual noodle machine: food-grade stainless steel rollers in a red ABS body, turned by an enlarged hand wheel on six bearing gears, with a knob that sets thickness anywhere from 0.5 mm to 5 mm. A built-in clamp holds it to the counter, and the wheel is made to take a motor later (sold separately). A chopping board and a dumpling mold are included. It measures 14.9 x 11 x 10.2 in and weighs 27.2 lb. Verdict: the OT-ZMWHY-2795 suits big families and dumpling-party hosts who roll thick and thin sheets in volume, since its 5 mm upper limit is well past the usual 3 mm; it is bulky, and the listing never says which noodle widths the cutters make. AstrumForge's listing is what this review covers; we have not turned the wheel.

What stands out

  • Thickness from 0.5 mm to 5 mm
  • Hand wheel on 6 bearing gears
  • Built-in clamp; motor can be added later
  • Chopping board and dumpling mold included

Who it fits

Good fit for

Households cooking for 5-10 people, and dumpling or wonton makers who want very thin and very thick sheets from one machine.

Who should skip it

Small kitchens, cooks who want a light roller to put away, and anyone who needs cutter widths stated.

Verdict: A heavy, wide-range hand-wheel sheeter for big batches.

AstrumForge OT-ZMWHY-2795 specs from the listing

OT-ZMWHY-2795 thickness: 0.5-5 mm

Wider range than 3 mm home rollers.

OT-ZMWHY-2795 drive: hand wheel, 6 bearing gears

Motor upgrade sold separately.

OT-ZMWHY-2795 build: stainless rollers, ABS body

Red finish.

OT-ZMWHY-2795 size: 14.9 x 11 x 10.2 in, 27.2 lb

Serves 5-10 people, per AstrumForge.

How the AstrumForge OT-ZMWHY-2795 is built

AstrumForge pairs stainless steel rollers with an ABS housing and a large hand wheel running on six bearing gears to cut the effort of turning. A knob sets the gap from 0.5 mm to 5 mm, and a clamp built into the base locks it to the counter. The wheel hub is made to accept a motor, which is not included and not specified. At 27.2 lb the OT-ZMWHY-2795 is heavy despite the plastic body. Cutter widths are not given, though the listing names angel hair and fettuccine.

Using the AstrumForge OT-ZMWHY-2795

Clamp the OT-ZMWHY-2795 to a solid counter, open the knob to 5 mm and feed in a flattened block of dough, folding and passing it until smooth. Close the gap step by step: 0.5 mm for wonton and dumpling skins, thicker for hand-cut noodles. Use the included dumpling mold to fill and seal wrappers, and the chopping board for cutting.

AstrumForge says a damp cloth is enough to clean the OT-ZMWHY-2795 rollers and body.

Before you buy the AstrumForge OT-ZMWHY-2795

Choose the AstrumForge OT-ZMWHY-2795 if you want a 0.5-5 mm range, large batches and the option of a motor. Choose the FOHERE MMD150-II if you would rather have a built-in 60 W motor and two cutter heads in a 12.9 lb body. Choose a light roller like the Calphalon Aero if you make pasta for two and need to store it in a drawer.

Check before you buy

  • Counter strong enough for 27.2 lb
  • Cabinet space for 14.9 x 11 in
  • AstrumForge cutter widths asked about
  • Motor bought separately if wanted

The product at a glance

AstrumForge Manual Pasta and Dumpling Maker

Best for: Families cooking for a crowd

Operation Mode
Manual
Housing Material
ABS
Roller Material
Food-grade stainless steel
Application
Commercial
Pasta Type
Spaghetti, Fettuccine, Lasagna, Dumplings
Color
Red

View on Amazon: AstrumForge Manual Pasta and Dumpling Maker Affiliate link

The AstrumForge OT-ZMWHY-2795 is a red hand-wheel noodle machine with stainless rollers, a 0.5-5 mm thickness knob, six bearing gears and a built-in clamp. It weighs 27.2 lb and can take an add-on motor.

Pros

  • OT-ZMWHY-2795 rolls up to 5 mm
  • OT-ZMWHY-2795 can add a motor later
  • OT-ZMWHY-2795 includes a dumpling mold

Cons

  • OT-ZMWHY-2795 weighs 27.2 lb
  • OT-ZMWHY-2795 lists no cutter widths

Good fit if

  • You roll sheets for big gatherings

Skip if

  • You need a small, light roller

Verdict: A heavy hand-wheel sheeter for big batches.

Specifications side by side

Spec AstrumForge Manual Pasta and Dumpling Maker
Operation Mode Manual
Housing Material ABS
Roller Material Food-grade stainless steel
Application Commercial
Pasta Type Spaghetti, Fettuccine, Lasagna, Dumplings
Color Red
Weight 27.2 pounds
Size 14.9*11*10.2in
Model OT-ZMWHY-2795

Frequently asked questions

What thickness range does the AstrumForge OT-ZMWHY-2795 have?

0.5 mm to 5 mm, set by a knob.

Is the OT-ZMWHY-2795 electric?

No, the OT-ZMWHY-2795 is hand-turned, but a motor can be added (sold separately).

What comes with the OT-ZMWHY-2795?

A chopping board and a dumpling mold come with the OT-ZMWHY-2795.

How heavy is the OT-ZMWHY-2795?

27.2 lb, at 14.9 x 11 x 10.2 in.

How do you clean the OT-ZMWHY-2795?

Wipe the OT-ZMWHY-2795 with a damp cloth, per AstrumForge.

See also