ApzvhvA Bamboo Mixer Sliding Tray Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ApzvhvA mztp-01112 is a hand-polished bamboo sliding tray for KitchenAid stand mixers in the 5 to 8 qt range. The mixer sits on it, and a low-friction underside lets you pull the machine to the counter edge or back under low cabinets without lifting it, which is the main reason to buy one for a heavy bowl-lift. At 17.2 x 12.1 in it is a large board, just under 1 in thick and about 1 lb, and ApzvhvA says it protects quartz, granite, marble and wood tops from scratches and vibration. It also works under a food processor, blender or coffee maker. One oddity: the listing promises both an easy glide and a non-slip base during kneading, without explaining how it does both, and it names the 4.5 qt Classic alongside 5-8 qt models. Verdict: a solid-looking bamboo slider for larger mixers. We read ApzvhvA's listing; we have not tried the tray.
What stands out
- mztp-01112: bamboo, hand polished
- For KitchenAid 5-8 qt mixers
- 17.2 x 12.1 x 0.98 in, 1 lb
- Also fits blenders and processors
Who it fits
Good fit for
Owners of a 5 to 8 qt KitchenAid, especially a bowl-lift, who keep it under low cabinets and want to slide it out instead of lifting it.
Who should skip it
Owners of a small 4.5-5 qt tilt-head with tight counter space; at 17.2 x 12.1 in the ApzvhvA tray is larger than a slider sized for those mixers.
Verdict: Big bamboo slider for big mixers.
ApzvhvA mztp-01112 specs
mztp-01112 material: bamboo
Hand polished; keep it dry.
mztp-01112 size: 17.2 x 12.1 x 0.98 in
Room for a large bowl-lift base.
mztp-01112 fit: KitchenAid 5-8 qt
Listing also names the Classic.
mztp-01112 weight: 1 lb
Adds little to the mixer's load.
mztp-01112 underside: low friction
Slides on stone and tile tops.
mztp-01112 other uses: blender, processor, coffee maker
Any heavy countertop appliance.
ApzvhvA mztp-01112 design
The mztp-01112 is a flat bamboo board, 17.2 x 12.1 in and 0.98 in thick, with a reinforced structure and a low-friction base that ApzvhvA compares to ball-bearing glide. It weighs about 1 lb. The listing says it keeps the mixer from shifting while kneading thick dough, but it does not describe pads, rails or a lip that would hold the mixer in place.
Living with the ApzvhvA mztp-01112
Set the mixer on the mztp-01112, then pull the board forward to work and push it back under the cabinets afterwards. Slide it to the edge to wipe crumbs off the counter behind. Clean the bamboo with a damp cloth, use mild soapy water on sticky spots and dry it, as ApzvhvA advises; do not soak it.
Before you buy the ApzvhvA mztp-01112
Choose the ApzvhvA mztp-01112 for a 5 to 8 qt mixer or another heavy appliance that needs a big board. Choose the Fracijuy pine slider (14.6 x 9.25 in), which is shaped for 4.5-5 qt tilt-head Artisan and Classic mixers, if yours is the smaller size.
Check before you buy
- mztp-01112: mixer 5-8 qt
- mztp-01112: 17.2 x 12.1 in of counter free
- mztp-01112: low cabinets above
- mztp-01112: hand wipe care
The product at a glance
ApzvhvA Bamboo Mixer Sliding Tray
Best for: 5-8 qt KitchenAid owners
- Compatibility
- KitchenAid 5–8 QT tilt mixers
- Material
- Bamboo
- Dimensions
- 17.2 × 12.1 × 0.98 inches
- Weight
- 1 pounds
View on Amazon: ApzvhvA Bamboo Mixer Sliding Tray Affiliate link
The ApzvhvA mztp-01112: a hand-polished bamboo sliding tray, 17.2 x 12.1 x 0.98 in and 1 lb, for KitchenAid 5-8 qt mixers and other heavy appliances; low-friction underside.
Pros
- mztp-01112 sized for large mixers
- Protects stone and wood tops
- Works under other appliances
Cons
- mztp-01112 grip vs glide unexplained
- Large footprint
- Bamboo needs dry care
Good fit if
- You slide a 5-8 qt mixer in and out
Skip if
- Your mixer is a small 4.5 qt tilt-head
Verdict: Good slider for large mixers.
Specifications side by side
| Spec | ApzvhvA Bamboo Mixer Sliding Tray |
|---|---|
| Compatibility | KitchenAid 5–8 QT tilt mixers |
| Material | Bamboo |
| Dimensions | 17.2 × 12.1 × 0.98 inches |
| Weight | 1 pounds |
| Size | 5-8QT |
| Color | Yellow |
| Model | mztp-01112 |
Frequently asked questions
Which mixers does the ApzvhvA mztp-01112 fit?
KitchenAid 5 to 8 qt stand mixers, per ApzvhvA.
How big is the ApzvhvA mztp-01112?
17.2 x 12.1 in and 0.98 in thick.
What is the ApzvhvA mztp-01112 made of?
Hand-polished bamboo.
Can I use the ApzvhvA mztp-01112 under a blender?
Yes; ApzvhvA lists blenders, food processors, juicers and coffee makers.
How do I clean the ApzvhvA mztp-01112?
Wipe it with a damp cloth and dry the bamboo.
Featured in
See also
- fracijuy pine wood mixer slider mat review
- bakers buddy anti slip stand mixer mat review
- ponuyt quilted aucma stand mixer cover review
- best hand mixers under 30
- best stand mixers under 50
- 8 Best Stand Mixers Under $100, Compared
- Best Stand Mixers Under $150 in 2026: 10 Picks Ranked by Specs
- Best Stand Mixers Under $200: 8 Spec-Based Picks
- hausmoda small 304 food grade stainless review
- fohere food processor review
